Results 1 to 9 of 9

Thread: Thinking about getting a P1 hull

  1. #1
    Join Date
    Jun 2012
    Location
    ON
    Posts
    19

    Default Thinking about getting a P1 hull

    Hey Guys,

    I was thinking about getting a pb mystic 29 until I saw this hull. I might have to get this instead.

  2. #2
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

    Default

    Hi,
    What hull are you thinking about ?
    A p1 king of shave mono RTR or just the hull ?

  3. #3
    Join Date
    Jun 2012
    Location
    ON
    Posts
    19

    Default

    Just the hull and adding my own electrics. what would be a good set-up for this hull?

  4. #4
    Join Date
    Jun 2012
    Location
    ON
    Posts
    19

    Default

    My main concern is how well this hull handles a variety of conditions (glass smooth, light and heavy chop, etc.).

  5. #5
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

    Default

    Ok,

    Mine runs nice and scale in glass, and it also runs nice with the jet skis making chop where I run at the lake.
    I have been modding this boat some, And running on 3s at 35 mph and 4s at 44 mph.
    I still am running the stock motor and esc for testing what I have done so far.
    The stock hull and setup had some bad torque roll.
    The hull and hatch could use some reinforcing witch I have not done to it yet.
    Hears a link to the modding and testing so far and lots of info for you to read and some videos to.
    https://forums.offshoreelectrics.com/...-offset-rudder.

    TTYL.

  6. #6
    Join Date
    Jun 2012
    Location
    ON
    Posts
    19

    Default

    Thanks Lenny,

    I appreciate the info. I love the look of this hull (big fountain boat fan). After seeing it run in some vids I knew I had to get it. Does venom sell the the wood trays to mount the electronics or would I have to make my own?

  7. #7
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

    Default

    I would say away from venom with a 100% mark up on rebranded stuff they sell,
    Look around for that stuff or make your own out of some thing,
    OSE store may have what you want and a lot cheaper than venom.
    What do you want to do with the boat ? Sport and fun scale runs , High speed saw runs.
    Do you have any lipos yet, If so what are they ?

  8. #8
    Join Date
    Jun 2012
    Location
    ON
    Posts
    19

    Default

    Hey Lenny,

    Thanks for the reply. I was thinking the same thing. I only bought the hull and hatch. The rest of gear I'll get off of OSE. I plan on using it for sport and fun scale runs, maybe some high speed saw runs. In terms of lipos I don't have any yet (what would you recommend?). Also, what esc would you recommend for 3s and 4s?

    Cheers,

    Mike

  9. #9
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,288

    Default

    I am using the stock 60a seaking and stock outrunner 2000kv,
    Outrunner motors sound pretty cool and have a lot of torque but run hotter temps like 200f is not hot for it.
    Inrunner motors run cooler and at 140f tops is hot for them.
    A better esc for you would be a 120a seaking and 1600kv to 2200kv motor,
    Lipos with great power are the Gens ace 30c 5300mah or step down but good turnigy 30c to 40c 5000mah.
    Hears links,http://www.hobbypartz.com/index.html
    http://www.hobbyking.com/hobbyking/s...dProduct=15021

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •