Not sure if this was design that way.
Can you guys check your boats and tell me if your rudder is offset the same way mine is?
Thanks
Robert
Not sure if this was design that way.
Can you guys check your boats and tell me if your rudder is offset the same way mine is?
Thanks
Robert
DJI Drone Advanced Pilot
Canada
Hmmm, looks like another project over the winter....
It was mounted that way. Will this create problem on the water?
Hope not much....
DJI Drone Advanced Pilot
Canada
Mine is not like that.
white geico w/2200kv 3674 leopard 53.5mph 4s2p, geico w/ 1800kv outrunner 52mph on 4s2p, genesis w/2200kv castle 53.8 on 4s2p, impulse 31 w/2200kv castle, stock p1 and ul-1
Mr Grimracer, what is your take on this please?
DJI Drone Advanced Pilot
Canada
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Can't you just loosen the bolts and straighten it out? Looks like fairly normal "mounting slop" to me... If the holes are clearanced correctly, and assuming the holes in the transom are drilled correctly, that could be simply a matter of loosening the bolts and moving the rudder back to vertical.
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Bolts and rudder holes are drilled tight, no room to move.
From what I see after removing the rudder the holes are not drilled properly. They out of line so I will need to fill one up with epoxy, paint and drill again to fix it.
I will only do the buttom one to be able to move it little closer to the prop shaft.
Little that I have to do this with new boat.... Why mine???
DJI Drone Advanced Pilot
Canada
Well... in lieu of getting a replacement, I'd probably opt to just slot the holes in the mounting bracket or open them up so it can be rotated back vertical. Not ideal, but in the end, the important part is for the rudder to be vertical.... You'll want to use some larger diameter washers to cover up the open up'd holes...
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Thank You Darin...
Easier and quicker I guess...
DJI Drone Advanced Pilot
Canada
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Or you could just do the simple "bend it back in shape" protocall......
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
Bracket is not bent Doby, holes are drilled wrong...
I will not bent the bracket. I will drill open one of the holes
on the bracket to be able to move it a little...
DJI Drone Advanced Pilot
Canada
Rudder fixed, thanks Darin.
DJI Drone Advanced Pilot
Canada
Hey Darin,
You got it fixed great! Let us know how it runs when you get into the water. I have not run mine yet it is all apart right now, hope to run next weekend.
MC
It is not noarmal, sorry about that!
I would also file or adjust the holes in the transom.
BTY, I have run rudders up to 11deg angled with some secuess. But the revolt runs best with the rudder stright.
Grimracer
Bookmarks