I ran mine at the Nats using the 1500KV motor, the new Dynamite/Pro Boat 80A ESC, on 4S1P (two 5300mAh 65C Thunder Power hard-case 2S packs), and spinning an X447/3, or an X450/3... I would NOT recommend this setup for everyone, as it can be brutal on the motor wires (weak link in the system, in my opinion) if the boat isn't setup JUST right, and for anything but strictly racing distances, but I was more than fast enough (and faster, in many cases) and I ended up finishing 3rd in the class. Prop efficiency helped a lot...
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Bookmarks