Results 1 to 3 of 3

Thread: BJ 26 project

  1. #1
    Join Date
    May 2012
    Location
    NH
    Posts
    545

    Default BJ 26 project

    Well I just ripped everything out and off from my almost new BJ 26 I hated the way it handled, I left the stuffing tube in, is there a cheaper set of hardware to get besides the fuller hardware and should I ditch the turn fins too?

  2. #2
    Join Date
    Aug 2010
    Location
    wi
    Posts
    1,460

    Default

    This right here will work:
    http://www.offshoreelectrics.com/pro...prod=ose-80085

    , you will just need to enlarge the holes on the hull if I remember right and trim the stuffing tube. I would leave the turn fins off.

  3. #3
    Join Date
    Jan 2011
    Location
    WA
    Posts
    218

    Default

    BJ26 SS strut/flexshaft & MG rudder works well for me! The missG rudder is 1/4'' longer than the BJ26SS rudder and has a lower water pickup...look at my youtube videos to see if it does what you want it to!

    my youtube name is DangerDad828...leave a reply!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •