Would anyone happen to have the motor specs to input into FE Calc for the castle 2028 780kv motor? I tried contacting Castle support and the response I received was less than informative . Thanks ahead for any .
Would anyone happen to have the motor specs to input into FE Calc for the castle 2028 780kv motor? I tried contacting Castle support and the response I received was less than informative . Thanks ahead for any .
What "specs" do you need? I'm pretty sure its a D wind, it's 56 x 113mm, 4 pole and 780kv, and max voltage of 10s. I have pushed 8000 watts out of it.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
io,Resistance, Mag , Turns ,Weight. Thanks Make! Some of that helps
Do you know what the biggest problem with the world is?
That the Smartest people are full of doubts while the stupid ones are full of confidence.::tt2
Your probably right that its a "D" winding but something is nagging at the back of the ole brain bucket and I thought the Castle 2028 was a 1Y? Doesnt really matter but I know the Sirius 2028 (pretty much an exact castle 2028 copy) is advertised as a 1Y. Has anyone here on OSE purchased any of the many Castle motor copies and ran it? The company makes a 1512, 1515,1717 and a 2028 copy of the Castle motor line.
John
Change is the one Constant
Here is the 1st response I received from Castle;
John,
I apologize for the delayed response to your e-mail. Unfortunately we do not have all of the technical specs for our car motors. Generally car applications do not require all of these details and were never released by the engineers. It is a 4-pole magnet, 12-pole stator and is a 1Y. Please let me know if you have any additional questions.
---Thomas PorfertProduct SpecialistCastle Creations
And then the 2nd when I wasn't satisfied;
John,
The 2028 is 780kv, and uses Neodymium magnets in a 4-pole configuration. In a car/truck application, the motor is warrantied to 8s, and in a proper boat set up, it is warrantied to 10s. The motor weighs 44 oz, but we do not publish any amp ratings or resistance to the public.
If you have any further questions, please e-mail or call the Tech Support line below.
Greg Wright
Product Specialist
Castle Creations
Would anyone know how to properly measure the resistance of the motor? Thanks for any help!
Hmmm, so its a 1y................you got it M4a1usr. We now also know it has a 12 pole stator and weighs 44 oz.
This enough info for your calculations hopefully?
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Here's a link for the "purple" Castle knockoffs:
http://www.modelsport.co.uk/sirius-1...roducts/368586
They still make the 1520 too!!
Picture of 1717
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
I know what you mean. Been a couple weeks since I emailed their sales link. And all I really wanted was rotors anyways (they sell them for the 1518,1520, 1717 and the 2028!) as replacements for my current motors. I'm not going to order them from the UK company. Their advertised prices dont look all that great to me. Sorry to hijack your thread John!
John
Change is the one Constant
No highjack :) Relevant info as I see it!
I'm glad this was straightened out. I know racers using this motor with 10-15* of timing advance without overheating - that much timing on a "D" motor should make it run very hot.It is a 4-pole magnet, 12-pole stator and is a 1Y.
.
ERROR 403 - This is not the page you are looking for
Hey John we went to the pond last night to test that Dumas hull my son got from you. A guy stopped by with a big 70"+ v-hull with one of the big "pop can" motors on 12s. Not sure but he might be back on tuesdays with us. Way too fast for that pond. lol
Mark
Their site must be flooded since you can't get on there very well. The 1717's say out of stock but, in forums they say the 1512, 1515 and 1717 should be in stock soon. The 2028 something happenned and that won't be around until at least August.
So many motor makers it's not funny. Even Johnny on HOR has "his" line of 56mm motors. Killer prices too. Just out....
Someone in the UK bought out his whole stock of 5694-1000 kv motors before they hit the web!!
Nortavlag Bulc
Bookmarks