Ekos with single FC 3730 outrunner build

[b20btec]

While working on my fc cheetah hull I decided to slap this one together also. FC Cheetah is on hold awaiting paint and esc decision. I wanted a low cost build but it still cost a bit of money. I bought a bare ekos and did the build rather quick kinda like my first build.

Build List:

Venom C1 34" Hull Bare
Epoxied existing Factory Holes
Seak King 180A
5.5 Bullet Connectors & Heat Shrink
Velcro
Flysky FS-GT3B
Turnigy 3S 5000 MAH Lipo x 2 - Series
Fightercat 3730 1600KV
Fightercat Carbon Universal Motor Mount
Fightercat 6MM-3/16 Collet
Traxxas 2075 Waterproof Servo
Fightercat Aluminum Servo Mount
Kintec Racing 3/16 Drive Cable
Kintec Racing 9/32 Stuffing Tube with Teflon Liner
K&S Brass Tube 5/16 - I can replace stuffing tube if needed
Kintec Racing 9/32 Stuffing Tube Bracket
OSE 3/16 Drive Dog
Octura M445 BC Prop
Fightercat 3/16 Small Bullet Nut
OSE Large Inlet
OSE Large Outlet X 2
Kintec Racing Aluminum Y Fitting
Kintec Racing 1/8 ID Coolant Hose
Kintec Antenna Tube - Green
Kintec Racing Antenna Mount
4-40 Linkage
Dubro Quick Connect
Kintec Racing 2mm Linkage adapter drilled to fit 4-40
Aquacraft Linkage Boot
Fightercat Offset Rudder