So I was running my stock Impulse 31 this past Monday and I was on my second set of packs towards the end of the run and it just cut off. It took a few miutes to get it in so I didn't get any temp readings and my wife said she saw a little smoke when I pulled the lid but I didn't.She probably did because she has no reason to even think there would be smoke but if there was it was very little. The packs are fine. I was running 2-2s1p 5000mah with the stock 60 amp esc and 1800kv motor. I don't have a video of the run but I do have this clip showing what the motor is doing. Servo works fine but when I WOT this is what I get....
Any help would be greatly appreciated so I can get back on the water!
Bookmarks