Motor torque

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike whiting
    Senior Member
    • Apr 2011
    • 120

    #1

    Motor torque

    I hate that the outrunner motor makes the p1 twist so bad. Any way to stop that? Without getting another motor
  • tlandauer
    Fast Electric Addict!
    • Apr 2011
    • 5666

    #2
    Mine doesn't twist! Adjust your trim tabs, I bought mine used here and the previous owner installed his own, these are a lot better than the current trim tab/ turn fin combo. http://www.offshoreelectrics.com/pro...d=ros-spdt-150 and these: http://www.offshoreelectrics.com/pro...prod=ose-80060
    Too many boats, not enough time...

    Comment

    • Mike whiting
      Senior Member
      • Apr 2011
      • 120

      #3
      Thanks. I'll try them

      Comment

      • tlandauer
        Fast Electric Addict!
        • Apr 2011
        • 5666

        #4
        Mike, I am no expert in tuning a boat, but before you start, you should have an idea of the settings. On my trim tab I measure the distance between the blade and the bracket. Also i find it is useful to have a steel ruler.http://www.ebay.com/itm/Mascot-Preci...06%26rk%3D2%26 I place it ( on its edge) along the hull bottom and trim tabs, you can tell then what angle it is set. I find the tabs need to be either neutral or a bit "negative---pointing down). For the P1 my stinger is absolutely neutral and/or with even a hint of "positive" ---and that got rit of most of my unstabled manners. Hopefully someone who really knows will give you better advice.
        Good Luck and have fun.
        Too many boats, not enough time...

        Comment

        • lenny
          Fast Electric Addict!
          • Sep 2010
          • 4293

          #5
          Hey,
          What prop are you using and on what s cells for your setup ?
          And do you have any pictures of the setup in the boat with the cells and of your transom hardware ?
          ? ONLY IF THEY WORK

          My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

          Comment

          Working...