From the left:
DPS-700
DPS-600
DPS-7000814
Most of them have On Off switch.
DPS-700CB will have wires with banana binding posts like this DPS-1200FB unit on he picture..
Not installed yet because I am out of binding posts until tomorrow.
From the left:
DPS-700
DPS-600
DPS-7000814
Most of them have On Off switch.
DPS-700CB will have wires with banana binding posts like this DPS-1200FB unit on he picture..
Not installed yet because I am out of binding posts until tomorrow.
Last edited by LiPo Power; 05-17-2013 at 10:14 PM.
DJI Drone Advanced Pilot
Canada
I can consider exchange within 2-3 days from the date
of receiving as courtesy. Unit would have to be sent back
to me first.
Other than this I have no warranty.
If you like to get power supply
with warranty I would suggest you look into this
couple of products:
http://www.offshoreelectrics.com/pro...p-sk-200011-02
http://www.hobbyking.com/hobbyking/s...8V_60amp_.html
http://www.chargery.com/S1200.asp
Regards
Robert
Last edited by LiPo Power; 05-13-2013 at 01:44 AM.
DJI Drone Advanced Pilot
Canada
DPS-1200FB power supply is the most powerful I ever had.
It is also the most compact unit out there, very quiet ( 8.0 or 9.5 long with the handle, 3.5 wide, 1.5 tall )
Perfect Compaq solution for 12 Volt, 900 Watts, 75 Amp power supply or in series for 24 Volt, 1800 Watts, 75 Amps clean and quiet superpower for all the hungry chargers out there.
Amazing!!!!
Check the real size comparing it to the 2S 5000 mah lipo battery....
DJI Drone Advanced Pilot
Canada
Both SOLD....
Last edited by LiPo Power; 05-21-2013 at 09:09 AM.
DJI Drone Advanced Pilot
Canada
Hi Robert I have one of your DPS 600PB power supplies bought last year. Any chance you would convert ( add second unit ) for 24v if so what would you charge for the upgrade?
Thanks
KartRacer ~ Dennis B
Delta Force Pirate 35'~Leopard 4092~1480Kv~Seaking 180~2X6S 65C 5000 Mha Dynogy Lipo,Parallel
Where do I send the funds for (1) DPS 700 CP?
My powerlab8 crapped out on me...so I ordered a powerlab6 this time...made me realize I should have backup for PS as well.
I am charging 5S (1 at a time) at 20A(4C)...my batteries will allow me to input 40A (8C)(I have been a little afraid to do that so far)
Can you recommend a PS that will pump either the PL6 or PL8(once repaired).
Thanks, shipping to San Diego,CA 92110
Funds sent...looking forward to the DPS-1200FB In series...Super Work Horse.
Hey Everyone!
I ordered a new PS and it arrived today....
The first thing I noticed was the Handwriting on the package itself...
That is the handwriting of a person meticulous in everything he does...it gave me great confidence as I opened the package.
The PS itself is a work of beauty...if a PS could be beautiful.
LiPo Power used some very nice connectors and wire, the tape job looked good, and the 2-into-1 power supply cord is top of the line.
My RC Passion is rcSurf
I never really know where I will end up when heading out on a Surf Trip....so I needed a mobile charging station...so I mounted everything inside a wheeled Suitcase.
I just wheel in to Starbucks, Fed Ex Office, this PS supply is so quiet I can even use it in a library, and recharge for another session in the Surf.
All in All, I am very happy with this new PS. I feel it is well worth the money spent. So, if you are on the fence on whether to buy one or not....do not hesitate...he will have you powered up in no time at all.
Last edited by kitekook; 05-28-2013 at 10:27 PM.
Robert
Sorry for delay on my end. I am still interested in the upgrade and will confirm with you very soon.
Thanks for your patience.
KartRacer ~ Dennis B
Delta Force Pirate 35'~Leopard 4092~1480Kv~Seaking 180~2X6S 65C 5000 Mha Dynogy Lipo,Parallel
Hello Robert,
I received the PSU a couple of days ago but did not open the package up until last night. The unit got banged up during shipping on the corner closer to the cable inlet and I did not see a switch like you had told me it would have (am I looking in the right place?). The impact during shipping affected the outlet where the power cable connects so inserting the cable is tighter than it should be. Do you think the impact could have affected the operation of the PSU? I will post pictures later tonight when I get home.
Thank you
It is possible that I have shipped the unit without the on off switch instead of the one with it, my apologies... I will have solution for you for sure.
Regarding the unit that was damaged during delivery, please sent me pictures to the email I have sent you via PM so I can see it before you plug it in to the wall and will go from there.
Your package was prepared very well for a long trip. Was the damage of the box visible at the time of pick up from the post office?
Thanks
Robert
Last edited by LiPo Power; 05-30-2013 at 06:25 PM.
DJI Drone Advanced Pilot
Canada
Can you show some more pictures of your ride inside and out ! , kitekook looks cool bud , i have a single P.S. 47 amp , i bought 2 and got scared so i sold one .
One picture to show the size of DPS-1200FB power supply...
DJI Drone Advanced Pilot
Canada
PS just pumping out the mAh's....
Surfer thread here https://forums.offshoreelectrics.com/...Rc-Surfer-2013
Thanks for the awesome power supply.
Bookmarks