56-102 Monster coming down the pipeline

[Brushless55]

Awesome, keep us posted and with pictures

[ray schrauwen]

What kv's did you get to test?

[ray schrauwen]

Go to HK web site, I'll pm you. Better hurry!

[lenny]

Ray check your pm's

Hear a link,http://www.hobbyking.com/hobbyking/s...s%5FMotor.html

[Brushless55]

Go to HK web site, I'll pm you. Better hurry!

Ray check your pm's

Hear a link,http://www.hobbyking.com/hobbyking/s...s%5FMotor.html

OH baby!!
this would rock my DF39 on the 1280kv setting running 6s

[Punisher 67]

Can you post some pictures Keith and who on this side of the pond sells them - I am very interested in the 56/112

[znus]

I ordered one from HK....then another one. I have a feeling these will sell out and then never return, just as the TP Power looking ones from last year.

I wonder what I'm gonna do with them?

[keithbradley]

Can you post some pictures Keith and who on this side of the pond sells them - I am very interested in the 56/112

I do.
I'm not sure if the HK motors use the same internals or not...they definitley look similar on the outside (save the different colrs/etc.). They are selling them for significantly less than my "dealer price" on the Proteus motors though.

[Brushless55]

I do.
I'm not sure if the HK motors use the same internals or not...they definitley look similar on the outside (save the different colrs/etc.). They are selling them for significantly less than my "dealer price" on the Proteus motors though.

why do some think this is a 2 pole motor?
https://forums.offshoreelectrics.com/...!-new-HK-Motor

[madmikepags]

just ordered 4 of them for *!***!***!***!**s and giggles i'll try em in a couple of twin setups!!!! 92 bucks each WTF I spent more than that on flex cables in the past 2 months!!!!

[photohoward1]

I'm with Mike! Just ordered one. Only cost me $68 bucks.. Discounted!

[photohoward1]

Mike. Whats a good cat for that Motor not an aeromarine.

[Brushless55]

I've got one on the way!

[Basstronics]

$68 how?

Im a platinum member and its the $92.62 in my cart. For $68 I would roll the dice. Not at $93+ shipping though.

[ray schrauwen]

We would all like to know how Howard pulled that one off. Did you have some credits built up?? I never knew you were a HK whore like me or by the sounds, maybe worse?? LOL, I KEED!!

$68 how?

Im a platinum member and its the $92.62 in my cart. For $68 I would roll the dice. Not at $93+ shipping though.

[Punisher 67]

Come on Howard fess up - you weren't wearing a bib now.........

[znus]

Although I have two of those Turnigy motors coming my way (they were sent today!) I still can't get over the fact that there's a bigger one out there. Keith Bradley - I might have to check your website out. The X524 will bring me my peace of mind. I'm sure of it.

[Punisher 67]

Dam it - Sorry Howard for the comment above - I left my laptop running in our cafeteria and some of the clowns at work decided to reply to some of my posts via snoping through my emails...........

[Doby]

Peter.....

Love the: "Ignore list member #67 " on your avatar.

[photohoward1]

Sure. No offense taken!

[Punisher 67]

Peter.....

Love the: "Ignore list member #67 " on your avatar.

Thanks John

That was changed about 5 minutes after I made the list , one of the many things I am proud of.......

[Mike Caruso]

Pics aren't very good, camera sucks, I suck, lol...

I'll try later too with a better camera from the GF.

What it looks like is that the inner windings got heated up and then the rotor may have rubbed a bit until it would not run right anymore.

I can feel inside the windings, sharp edges and some cooked but, not burned enamel from the field windings.

The rotor seems fine to the naked eye but, only Lehner knows. some of the magnets could have partially turned on the shaft there by messing up the alignment of the poles.

Seems to have a definite north & south.

I will check the rotor weight some time when I find that scale. Very heavy in comparison to a 4 pole motor like Neu, Leo, TP.

Very dense power.

What the pictures can't show at this time is the iron surrounding the field inside the can. Can't tell if the windings are woven through or if it is just an Iron ring to increase field strength.

Bearings, no question are top shelf. I might order some from Lehner and give them a try.

Hell of a paper weight and kind of dangerous taken apart. The rotor is super scary strong.

Now, if Leo or TP could make a 4 or 6 pole rotor with that density... Oh, thats called a Neu motor, lol...

NEU nice motors I hope to buy one soon when I figure out which one I need to run over 100 mph SAW you know 100.1 MPH LOL. Still need to decide on a boat but winter in Chicago will be here soon. Hey Ray, thank you for this information as I am learning all I can about electric motors. I learn from people like you a lot easier than read all the motor web sites as I just still don't understand. I listen to a young friend who really knows this stuff and spins me around because he will explain one motor/battery comb, then he says BUT you could do xxxxxxx xxx and run the same with less batteries. DOH! LOL I love him like a son.
I saw a 10s NEU 2212 or 2215 run in a JAE really large modified hull WOW David H. he did run 103 mph SAW at Huntsville last month. As Grim says Rock and Roll!
Mike

[Brushless55]

Got mine
and no that's not a 1515 next to it, that's one of my CC1717 motors


and next to my PMono 4092 motor

[ray schrauwen]

I can't figure out why there is a rubber ring on the front?

Did your cooler seem not very tight??

Maybe the ring protects the motor if the cooler leaks? lol...

[ray schrauwen]

It also spins very easy compared to a TP Power motor. Pretty smooth.

Doesn't seem like you can remove the front plate without the magnet core. Bearing jammed on shaft. I want to see inside.

[Brushless55]

I can't figure out why there is a rubber ring on the front?

Did your cooler seem not very tight??

Maybe the ring protects the motor if the cooler leaks? lol...

my first thought is it keeps the cooler from moving to far forward.
it does move really easy back and fourth..

[znus]

You guys got yours? Damn! I thougt I'd have mine by now? Oh well, I sold them (unseen) anyway and bought a X524 from Keith.

[ray schrauwen]

Me thinks you are better off.

BTW, I had no idea Keith was selling these until afterwards.

BTW, thats me you're chattin' with on HK.... z.......

You guys got yours? Damn! I thougt I'd have mine by now? Oh well, I sold them (unseen) anyway and bought a X524 from Keith.

[znus]

Me thinks you are better off.

BTW, I had no idea Keith was selling these until afterwards.

BTW, thats me you're chattin' with on HK.... z.......

I know Ray. I recognize the flying red cat

[RIPFENCE]

heres another sirius motor but it does not have the adjustable kv...looks awesome as well..mhz has some stuff specifically made for them sometimes so maybe its only a one off..am thinking about getting one..beastly!!!

http://shop.mhz-powerboats.com/categ...--1-150KV.html