Results 1 to 2 of 2

Thread: Lipo clarification needed on the P1

  1. #1
    Join Date
    Apr 2011
    Location
    OR
    Posts
    28

    Default Lipo clarification needed on the P1

    Hey guys,
    Quick question on the batteries for the P1. I'm looking at running 5400mAh 4s.

    I see everyone runs two batteries down the sides of the hull which makes more sense for keeping the weight low as well as letting you play with the COG a little better. No one really clarifies though....

    Are you guys running two 2s lipos in series?

    Or are you running two 4s in parallel?

    I'm assuming it's the 2s.....as a pair of 4s seems way to heavy for such a small boat. Just wanted to check though.

    Thanks for the clarification guys!

    Mike

  2. #2
    Join Date
    Sep 2010
    Location
    nj
    Posts
    4,289

    Default

    Hi,
    I have been using one 4s 5800mah and smaller mah,
    And one 3s 5300mah and smaller mah.
    Also two 2s for 4s.
    I modded the stock setup that was inside the hull,
    Read through this good stuff.
    Hears a link to more info and modding and testing so far.https://forums.offshoreelectrics.com/...-offset-rudder

    TTYL.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •