Lipo clarification needed on the P1

[5150WS6]

Hey guys,
Quick question on the batteries for the P1. I'm looking at running 5400mAh 4s.

I see everyone runs two batteries down the sides of the hull which makes more sense for keeping the weight low as well as letting you play with the COG a little better. No one really clarifies though....

Are you guys running two 2s lipos in series?

Or are you running two 4s in parallel?

I'm assuming it's the 2s.....as a pair of 4s seems way to heavy for such a small boat. Just wanted to check though.

Thanks for the clarification guys!

Mike

[lenny]

Hi,
I have been using one 4s 5800mah and smaller mah,
And one 3s 5300mah and smaller mah.
Also two 2s for 4s.
I modded the stock setup that was inside the hull,
Read through this good stuff.
Hears a link to more info and modding and testing so far.http://forums.offshoreelectrics.com/...-offset-rudder

TTYL.