Will do. And sorry guys. Forgot the camera. Maybe with my phone
Sent from my SPH-D700 using Tapatalk 2
Will do. And sorry guys. Forgot the camera. Maybe with my phone
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
So full throttle. Plug in battery... Nothing. Servo.works but not motor. Whatelse can i try and it didnt.let smoke...
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
That is odd.That is a PB ESC eh?
Turnigy 120 aquastar esc.
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
Totally not familiar with those.Got to go out for the day.Talk later
Ok. Ill keep messng with it. Maybe something will work
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
So.going to test the esc on a differe.t motor. That way i know if.its the esc.or motor...
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
Well esc is bad. What now?
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
Get an ESC.And get a T-180 or Seaking 180,they are the same.That way you can prop up later.
Kinda figured. What kind. No castle esc.
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
What brand is the t180?
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
I'm pretty sure the T stands for Turnigy.I think that is why everyone refers to them as T-180's.It's a Hobby King thing. The 180 is what I would get.You already pooched a 120.All it would take is for your flex to bind a bit with a bigger prop and there goes another 120. Oh yeah,how many runs did you go before regreasing the shaft?
Ibhave about 3 runs in the grease now. I should re grease it.
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
I do mine before each day out.I pull them out at the end of each day.I have seen some of the flexes rust when sitting in the tube.
The stuff i put on prevents rust... Oh wow. Ok my bad
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
Not all of them.It must be the quality of the flex.Oddly enough,my most expensive flex's to date.The ones I got from Randy (BBY) are awesome.Removeing them is just habit now and greasing them is my morning ritual.Along with COFFEE.
Ok cool. Hah i.need a thicker grezse cuzbthis stuff now is just a little thicker than wd40 and it flings out around the collet. I have an oil.stain all the way around the hull on the inside. Hah
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
I picked up some Lucas marine Blue grease and it works awesome.I'm good for 4-5 runs and the shaft still has some on it when I pull it out.
This stuff is from ofe and seems good
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
So looking for a esc now. Starting to miss my crawler too so I need to get a small lip for that and I'm also missing my brushless rc10.need to make a 5.5 mm bullet adapter to think 4 or 4.5 so I can use my ezrun 150a esc on my rc10. Busy but its summer now...
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
So now my big truggy is gutted of everything except the motor. Almost roller. I'm wondering if that.motor can fit in the mg and if the t180 can take it?
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
Is that the Tork?If so,no problem,With a X645
No it is a castle mamba monster 2200 kv
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
So it is a 1515 like mine,same as mine.That'll push a 645.I'm going to try more this weekend.I'm going to lake country.
If you end up wanting it to live in the MG I could make a mount for you.But to try it the stock mount will work.But soon very soon you will need to support the motor better.
Jason's 004.jpg180 002.jpg
So id need to get a mount for it. What about cooling with the fins
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
OSE sells the cooling can.
Are these 5.5?
Here is the cc1515
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
That is factory Castle ? Then they are 6.5's. And here is the cooling can.http://www.offshoreelectrics.com/pro...ham-castle1515
I got to go to work.
No those are from the ezrun esc. How can I measure them first?
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
They measure 6mm on the esc. And the motor plugs are the same. Is that 5.5?
Sent from my SPH-D700 using Tapatalk 2
When speed isnt the option, change your ways
Bookmarks