So today i went out to the lake with my brother. By the way my brother has a MG and im running the MC . Had the boats for about a month now and been playing with it every weekend. Back to what happen, took the boats out for the first run and did a couple of laps. Boat ran great , but maybe 5 mins into it , my MC just stopped. Then i wait for like 5 sec and its working fine. Then i did a few more laps , and all of the sudden the boat was going full throttle on neutral and the only way i could make it stop was pressing forward on my trigger for brake but once i let go the brake and back to neutral the boat will go back to full throttle. Once i told my brother whats happening, i got it back to shore slowly and carefully. Opened the hatch and one of the lipo came off the velcro and slid towards the front of the hull. Fix the lipo back to where it suppose to be . Checked all connections , lipos , on/off switch, my remote had fresh batteries. Turned on the remote and boat. Everything worked fine and i finish off the lipos. Went back to the car , check everything out , let it chill for 5mins or so put new lipos , recheck everything. Turned on the remote and boat, did everything that it suppose to do. Went back to the lake , did a few laps and my boat took off full throttle with no brake or throttle response and ran that MC into the side wall. What do you think happen ? Crack that Hull right in half and in pretty bad shape. Lucky it didnt fill the hull fast enough and was able to get the boat back. What should i do now ? Try and fix the hull ? but to me it doesnt seem like it tho. i will try and post up pictures of the damage areas. Or should i just buy a new hull and be done with it ? But everywhere is SOLD OUT of the MC hull. Will the MG hull work ? Or i can just go buy a Proboat MC PnP and part out what i can or not. What to do now ???? I dunno anymore !!!! So frustrated !!!! Any suggestion will be greatly appreciated.
Bookmarks