Mause Bullet Build

[SJFE]

THANKS.Yes it was right on the money. After cutting the first drive cable to short and makin the second one I found that out. It's a damn good thing I keep plenty of extra prop shafts and cable around...

[Doug Smock]

Good looking build.

[Steven Vaccaro]

THANKS.Yes it was right on the money. After cutting the first drive cable to short and makin the second one I found that out. It's a damn good thing I keep plenty of extra prop shafts and cable around...

Nice job. Nice thing about the glue method on shafts is that the cable and shafts are easily reusable.

[SJFE]

Thanks Doug:). Steven, How do I unglue them I forget???

[Darin Jordan]

How do I unglue them I forget

Heat... I think the Loctite releases at about 280 degrees... Just hit it carefully with a propane torch...

[SJFE]

In my case the stove...lol:D. Thank you Sir.

[SJFE]

After doing the math I am going to break down the set of IB3600s I build into 2 5cell packs. That will give me just ober 28k for rpms. I will test it Saturday after noon. Getting ready to head out to the kitchen soon and finish up.

[Doug Smock]

After doing the math I am going to break down the set of IB3600s I build into 2 5cell packs. That will give me just ober 28k for rpms. I will test it Saturday after noon. Getting ready to head out to the kitchen soon and finish up.

Thats better.
Maybe start with a X438 or 440, get her dialed in and running free, check temps frequently!! Then prop it up if you can!!! Hang on!!!!!:D

Doug

[Doozie870]

Looking fantastic! high 20ks is sure to make a sweet sound, I cant wait for the vid! :D

[SJFE]

I call this one complete for the Season. Next winter she will be sanded primed and painted. My fleet will all be in identicle colors.. Testing to begin ASAP. Look for them videos:D.
Thanks Darin, Doug, Steven & every one else for the input. I couldn't have done it woth you guys!!

[Darin Jordan]

Alright dude... I waited an entire weekend... you've had plenty of time to get out on the water... I want pictures, video, and full report.... HOW did the Maus do?!! Sure looks good! I'm still kicking myself!!

[SJFE]

I regret to inform you it is still on the shelf. I am no more happy about it than you. I have had 0 time to get it on the water. I will not be able to even attempt a run untill maybe wednesday or thursday night. Rain is in the forcast for both days. If the weather don't change it's saturday. I have new shelves to put up tonight. After that I'll seal the antenna hole and install the left turnfin. Oh I gota pm ya come to think of it....

[avengersteve]

i think it going to run too hot LOL your like me when it comes to cooling

[SJFE]

Anything worth doing is worth over doing:D

[SJFE]

This one is ready for the water. I have my 5 cell packs built. The hull is sealed up. Left turn fins on. Water inlet moved to decent location and some new stickers. I will try to test this weekend weather permiting.