Results 1 to 5 of 5

Thread: 4074 2000kv fitted with pics

  1. #1
    Join Date
    Oct 2009
    Location
    UK
    Posts
    742

    Default 4074 2000kv fitted with pics

    ImageUploadedByTapatalk1334329150.146460.jpgImageUploadedByTapatalk1334329353.505263.jpgImageUploadedByTapatalk1334329367.833673.jpgImageUploadedByTapatalk1334329386.188081.jpg
    I got tiered of not having a regular mount to interchange motors and the torque roll was annoying so I decided to fit a turnigy XK-4074 2000kv motor. I have one in my genesis and it really moves, I had this motor already so I might swap it for the 3674 2200kv version as I prob won't be able to put a 45mm prop on the p1
    Last edited by jamespl; 04-14-2012 at 03:18 AM.

  2. #2
    Join Date
    Apr 2011
    Location
    CA
    Posts
    5,666

    Default

    Wow, That's great! I wish I hadn't put extra layers of FG to reinforce the hull, will have a hard time removing the clamp. I like this solution and Lenny's off-set rudder.

  3. #3
    Join Date
    Oct 2009
    Location
    UK
    Posts
    742

    Default

    I tested it yesterday. Is so much better to drive IMO. It's faster but I need to prop up, still got the x640 on there at the mo. I had to cut about 4mm off the bottom of the mount sides to get it to level out.
    Here is the vid http://www.youtube.com/watch?v=2b-_zgBIzvA
    Last edited by jamespl; 04-15-2012 at 11:00 AM.

  4. #4
    Join Date
    May 2008
    Location
    CT
    Posts
    124

    Default

    Nice video, can't wait to get mine together.

  5. #5
    Join Date
    Oct 2009
    Location
    UK
    Posts
    742

    Default

    It didnt seem to rn as well in that vid as when i tested it a day or 2 before, i think its because where the vid was taken there is always a little chop so it was bouncing.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •