Got my dad an Impulse 26 for this past christmas. I had the stock electronics from my miss geico lying around so I did a little transplant surgery. All in all the swap over was ridiculously easy and it makes me want an Impulse 26 now, although I may just jump up to the 31. As stated set up is stock Probaot 60amp esc and 1500kv motor out of an MIss Geico. Was running a 3300 mah 4s in the video and the stock plastic prop. Gonna throw a x645 on her and either a higher kv motor and stick with 4s or a larger esc and go for 5-6s just for the hell of it.
Impulse 26 with MIss Geico Guts VIDEO
Collapse
X
-
boat runs good I just put a UL-1 power plant in mine and ran a 642 prop I got pretty much the same results I think you will really wake it up with a metal prop. This little boat takes power upgrades pretty good and they are easy to swap out I did it in the time it took my 2 batt packs to charge. -
Love it!!I get great pleasure crammin big motors in small hulls myself. I think you'll be disappointed with an x645 as it is SO much more prop than the stock one. Torque roll will be horrendous, and torque steer will keep it on a right turn path almost constantly. Conisider making it even faster(its already bad-a$$ for an Impulse 26), but keeping it controllable with an m445 or s220 possibly.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
I think the stock prop is fairly beefy.......................its like an s215 isnt it?NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
Was just curious if you were using a single 4s pack with the 1500kv motor?NEVER SATISFIED RACING
Fine Design 32 V-Hull 4082+6sComment
Comment