Ok well i have some line i could use. Its 1/8 inch rod. Its strong stuff i got at my hobby store. Could this work or would i need something else?
Ok well i have some line i could use. Its 1/8 inch rod. Its strong stuff i got at my hobby store. Could this work or would i need something else?
When speed isnt the option, change your ways
I think your best bet will be getting the kit that I posted by octura.It was $63 or so and comes with a flex cable,Fine's does not.The only thing you would need is a drive dog and prop.There are some options there as well, IE:Prop shaft size.
For props, i have some from offshore, they are plastic props. They are cheap but all a different color and different pitch. I cant look them up on my phone but if you guys can that would be cool and let me know what size drive dog i need etc. I have the props at my grandpas garage where i was working on this boat. So i found a strut and/or a stinger for about 10 bucks. So im at 18 bucks? Why is the kit a better bet, sorry im a teenage guy that doesnt have much money.. hah
When speed isnt the option, change your ways
Found this i might need to look at..
http://www.ebay.com/itm/R-C-Boat-Shi...-/380426153095
Same thing i think... Would this work?
When speed isnt the option, change your ways
You're gonna need this http://www.offshoreelectrics.com/pro...od=oct-oc64pkg and a stuffing tube(brass tube) to go along with that e-bay setup.So the flex is another $23
Could i get any of this at my lhs?
When speed isnt the option, change your ways
Go with a strut like this....................cheap and easy. You will need a flexshaft as well..............dont know the size but I think its 3/16.......either that or 4mm.
http://www.offshoreelectrics.com/pro...qub7881&cat=76
Here's where i suggest the drive hole to go..........and where the rudder should be
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Ok. Thanks for the picture. Will that rudder/strut i showed earlier work?
When speed isnt the option, change your ways
I got to learn how to do that with a pic M-a-W.
I doubt that you'll find any boat stuff except a RTR boat at the LHS.That is the way it is around here anyway.You could check.
Now you see why that one complete kit is worth it,the SV strut is $22,and still needs stuff,the cable is $23 and you still need a rudder.The kit will for sure all fit together eliminating further issues.Only need a drive dog,best as I can see.
Last edited by srislash; 04-04-2012 at 09:18 AM. Reason: added info.
Ok i will save up and get that kit. Hope it works. If any of you find a cheaper kit,c that would be GREAT
When speed isnt the option, change your ways
The rudder and strut I found email I can buy it now for 20
When speed isnt the option, change your ways
The only thing with that setup is a serious lack of info.They don't say if it is for a 4mm shaft or 3/16.
I will ask the guy and find out. What should i ask him? Any info i need to ask for?
When speed isnt the option, change your ways
I did some research and best that I can tell is it is 4mm.My concern was the bushings but it looks as though they would come installed. You can get a 4mm shaft that is stepped down to fit 1/8 props which is probably all you will need.Also probably what you have.
Oh great. Sounds good. So this would work fine?
When speed isnt the option, change your ways
It should work fine,not what I would do,but fine.But then I just blew $1200 on the last build.
Ya i really dont have 1200 bucks... Hah. I have 1/8 rod so i could use that as i think you just said. I will try finding the props i have.
When speed isnt the option, change your ways
You will need a flex cable and prop shaft.Not 1/8 rod
Like this http://www.offshoreelectrics.com/pro...?prod=ose-1085
Actually not like...THIS is what you will need.
Ok. Could i use rod for mock up?
When speed isnt the option, change your ways
Could i use rod for mock up?
When speed isnt the option, change your ways
Sounds good. What kind of tube should i get? I will check at my hobby store and see if they have flex tubing because they have a boat section.
When speed isnt the option, change your ways
Sorry Mason,I'm doing a build/paint job for someone on the side. You should just get your parts and then go from there.You could for now prep the hull.Sand all the old crap off,wetsanding works best for this.Just get it looking smooth for primer.
He said he would take 20 for buy it now
When speed isnt the option, change your ways
Am I correct with the 4mm and bushings?
I dont know yet. I will findout as soon as i can.. i will sand the boat down and clean it up.. also, how can i make a boat more bouyant?
When speed isnt the option, change your ways
Any foam pool noodle around?
No. I dont go to the pool much, i have the nose of the boat filled with foam tho. What else could i do... Also, can i run a water cooling from the rudder, to the motor, out the motor, to the esc, out the esc, and out the boat?
When speed isnt the option, change your ways
That is the idea.Only in this order,From rudder to ESC,out ESC to motor,out motor ,out boat.If the nose has foam in it that should do it.
Ok. After i finish putting the electronics in, should i fill the rest of the hull up?
When speed isnt the option, change your ways
Bookmarks