Page 1 of 4 123 ... LastLast
Results 1 to 30 of 113

Thread: Power supplies 12v or 24v plug and play

  1. #1
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default Power supplies 12v or 24v plug and play

    12volt 47 amp 564 watt,
    24volt 47 amp 1130 watt.
    I am using two in series for 24v on my lab 8, they are very stable, rock solid,
    They are set up ready to go with 4mm outlets and power cords.

    Heres a close up of the bussiness end of the power supply.
    You can see the 24v model is wrapped in black, comes with jumper to allow 24V. as you can see you can use 2-12v and 1-24v at the same time. 2-12v top row , 24v bottom row, or remove the jumper and you have 4-12v outlets. With the jumper in place you also can use the out two far out side connections for two 24V outputs. These power supplies are rated at 47 amps. I have personally abused my test setup, just to see where the fail point is. I have had my Lab 8 with 6-5000 3S @ full 40 amp charge and a cellpro 10 with 2-5S running wide open. I'm still using this power supply with no problem. Just because I did this for testing purposes,,,,,,,,,
    I DO NOT RECOMMEND GOING OVER RATED OUTPUT!!!

    Singles are 12v and white $55 shipped

    Doubles are 12v and 24v and black $110 shipped

    These are 100% ready to use. Plug and play

    I will ship out of the US,

    Check out the thread on RCG
    http://www.rcgroups.com/forums/showthread.php?t=1612434

    I have sold many there!
    Attached Images Attached Images
    Last edited by JRPLANE; 04-27-2012 at 01:13 AM.

  2. #2
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

  3. #3
    Join Date
    May 2011
    Location
    TX
    Posts
    273

    Default

    Do you have any 24v power supplies available?

  4. #4
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Yes sir ready to ship

  5. #5
    Join Date
    May 2011
    Location
    TX
    Posts
    273

    Default

    Any recalls yet? ;-) I'll pay pal you and provide shipping info in the morning.

    Thanks,

    Todd

  6. #6
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    No recalls at all , these things were made to run 24/7-365, the way we rc'ers use them they should last two life times.

    Just paypal jrplane@hotmail.com, i can ship it in the mourning

  7. #7
    Join Date
    Jul 2011
    Location
    NY
    Posts
    1,556

    Default

    They come with power cord I am interested in getting a double what have you ran with a single unit

  8. #8
    Join Date
    Apr 2009
    Location
    NO
    Posts
    248

    Default

    Hi,
    I can not see it mentioned here. What is the input voltage and frequency?
    110/60Hz or 230/50Hz?
    Maybe interested in two 24V units that I can parallel into + 90A @ 24V
    Anbjørn

    Anbjørn

  9. #9
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Yes they come with a power cord. Look up in the ad, I use a double with a lab 8 all the time.

    Here is the link to RCG with feedback from the people there,
    http://www.rcgroups.com/forums/showthread.php?t=1612434

  10. #10
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Anbjorn, I only sold one oversea's mostly because of the price of shipping.
    The units say 110-240 volt, 50-60hz. Yes two 24volt units can run parallel for 24v@94amp.
    The 24v i sent to the UK cost $60 to ship.

  11. #11
    Join Date
    Apr 2009
    Location
    NO
    Posts
    248

    Default

    Great,
    Do you mind checking the shipping cost to Norway? Zip code 6065
    What is the physical size and weight of two 24V units?
    Anbjørn

    Quote Originally Posted by JRPLANE View Post
    Anbjorn, I only sold one oversea's mostly because of the price of shipping.
    The units say 110-240 volt, 50-60hz. Yes two 24volt units can run parallel for 24v@94amp.
    The 24v i sent to the UK cost $60 to ship.

  12. #12
    Join Date
    Jul 2011
    Location
    NY
    Posts
    1,556

    Default

    I see only what you ran with a double unit I am curios what you have ran with a single unit just in case i want to split it up

  13. #13
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Anbjorn, looks like $74 extra to ship two 24v they weigh 9 lbs each

    Chris, i have a friend run to cell pro 10's at the same time, he charges 4-5000/3s at a time. You have 47 amps to work with.

  14. #14
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Anbjorn, rechecking I can ship for aditional $55 not$74

  15. #15
    Join Date
    May 2011
    Location
    TX
    Posts
    273

    Default

    Jrplane,

    Money sent!

    Thanks,
    Todd

  16. #16
    Join Date
    Jul 2011
    Location
    NY
    Posts
    1,556

    Default

    I will take a double but can you sell me another few pices of heat shrink two lives to do a single unit and one for a double so three total just in case I want to split it up or put back together

  17. #17
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Quote Originally Posted by Chrisg81983 View Post
    I will take a double but can you sell me another few pices of heat shrink two lives to do a single unit and one for a double so three total just in case I want to split it up or put back together


    Sure just add $5 for the shrink paypal. jrplane@hotmail.com

    I can get it out today!

    Thanks. Jeff
    Last edited by JRPLANE; 04-11-2012 at 11:54 AM.

  18. #18
    Join Date
    Apr 2009
    Location
    NO
    Posts
    248

    Default

    Great,
    Then I will take two 24V units.
    Sending $275 by PayPal now.
    Also you have a PM with complete delivery address.
    Thanks
    Anbjørn
    Quote Originally Posted by JRPLANE View Post
    Anbjorn, rechecking I can ship for aditional $55 not$74

  19. #19
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Anbjorn, check your email for USPS mail, they will send conformation number, Thanks Jeff

  20. #20
    Join Date
    Sep 2009
    Location
    ME
    Posts
    1,332

    Default

    these are exactly what i need hope i get get one soon!!
    "FE" STANDS FOR FRUSTRATING EXPLOSIONS

  21. #21
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Quote Originally Posted by RIPFENCE View Post
    these are exactly what i need hope i get get one soon!!
    Right now I have 4-12v or 2-24v left,

  22. #22
    Join Date
    Oct 2011
    Location
    DE
    Posts
    332

    Default

    Not had a problem yet with mine works great 12 or 24 volt

  23. #23
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    I was telling a couple of local guys how good the power supplies are, so they called my bluff. One guy said he would buy if he and his buddy could hook up to a 24v and charge there batteries. So I had one that didn't have the shrink on it, and it was only 65 degrees outside, they hooked 2 lab8's to it 8 lipo's (4each) turned both chargers up to 40 amps and let them run. Over the course of the day, they charged every battery that anyone would let them. One session my amp meter showed 59.9 amps for over 12 minutes. The power supply got warm to the touch but not hot.
    I told them I would sacrifice the power supply, but if it survived one of them had to buy it.
    I sold 3 that day!

    I do not recommend doing this, but I've seen it with my own eyes, I believe they are very underated. They are rated for 47 amps lets try to keep it there!

  24. #24
    Join Date
    Jul 2007
    Location
    or
    Posts
    1,088

    Default

    Jeff,
    If you have a 12V left I'll take it.
    Brian "Snowman" Buaas
    Team Castle Creations
    NAMBA FE Chairman

  25. #25
    Join Date
    Sep 2010
    Location
    FL
    Posts
    42

    Default

    Jeff I will take 1-24v. Steve

  26. #26
    Join Date
    Nov 2011
    Location
    In
    Posts
    97

    Default

    Quote Originally Posted by voepel View Post
    Jeff I will take 1-24v. Steve
    It has shipped!

  27. #27
    Join Date
    Jul 2011
    Location
    NY
    Posts
    1,556

    Default

    Jeff let me know if you got the money

  28. #28
    Join Date
    Apr 2010
    Location
    AZ
    Posts
    643

    Default

    Guys we purchased 2 of these packs. They are fantastic and a GREAT BUY.

  29. #29
    Join Date
    Jul 2011
    Location
    NY
    Posts
    1,556

    Default

    Jeff all I half to say is wow guys this is a great supply I just plugged mine in about an half hour ago and when ran in series it will run whatever I throw at it I bought a track power supply from tower for around 90 dollars and it can't do a tenth of what this thing can run if you need a power supply this is the one no doubt about it plus jeff was great to deal with sent me everything I requestedChris g

  30. #30
    Join Date
    Jul 2010
    Location
    MN
    Posts
    103

    Default

    Very interested in these supplies but I'm a bit ignorant in this area. Question for JRPLANE...although anyone that feels sorry for me can speak up. Is it correct that 1 12v supply will power a dual or quad battery charger with enough juice to charge between 2A to 5A? For example - would 1 supply be enough to run the Imax dual 400wX2 charger that Hobbypartz is advertising for $150.00?
    Thanks for your patience.
    They call me DOUBLE D

Page 1 of 4 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •