Find The Mounting Holes For Second Trim Tabs

[dag-nabit]

This is nothing new for us old dog Spartan owners, but I saw an inquiry on this just a couple days ago.

Since i was locating and opening the holes while setting up my new hull, I thought I'd snap a couple photos to help out some of the newer Spartan owners.

Sorry for the poor quality pics, I was in a bit of a hurry.

Procedure:
1. In a dim lit or darkened room shine a bright flashlight on the transom from inside the hull
2. Locate the "donut" on the outside of the hull
3. Use a sharp awl to puncture, or carefully drill out, the center of the "donut" through the hull to open access to the molded bolt recesses.
NOTE: Be careful not to drill too deep

NOTE: Lubricate threads on bolts, preferably with a non-petroleum based lubricant, before threading into hull. This will reduce/eliminate galling the plastic into the threads and will allow for easy removal.





Kevin