Im looking to build a huge boat.... I was interested in the segad 58" gas boat to convert to FE,,, cant find one under 800 bucks... to much money for me to spend now.... anybody got anything for me???
Im looking to build a huge boat.... I was interested in the segad 58" gas boat to convert to FE,,, cant find one under 800 bucks... to much money for me to spend now.... anybody got anything for me???
Lakeside entertainer
If you want to build huge you need the funds. If you're trying to do it cheap you're wasting your time. What happened to " I have too many boats"?..,., slow down and think about what you're doing and money wise, what you're able to afford reasonably. Jmo
Here's a 50" Hull with full hardware for only $190!! I converted their big Hydro hull to Electric.........runs great. The engine is not included which you dont want anyways............
http://www.nitrorcx.com/99b-12003-eg-1300-kit.html
Last edited by Make-a-Wake; 03-09-2012 at 11:13 PM.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
There's a start... Plus you could always sell your other boats for cash to fund something like this.
The hull make a wake posted is actually about 46", but it's definitely a good sized hull and will take some serious power to get some speed out of it. It does take work to convert... you will need to treat it as a bare hull and install hardware yourself, and plug up all the holes and vents that are in the boat (it's set up for gas).
Fightercatracing has a 60" cat, but I think they are out of stock at the moment. I think OSE has a 50" cat but I'm not sure about stock there either. These are bare hulls that you will need to build. If you're looking for a bare hull for under $800, it can be done. If you're looking for a built boat for $800 you aren't going to end up with much.
EDIT:
If you are interested in something a bit smaller, you could go with the 41" in my avatar. It's a sizable difference in comparison to a 50" hull though.
It's my Big Hydro in my signature.............
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
I dont think I would call that "full hardware", that's a bit mis-leading. The only thing worth using on that boat is the rudder. The strut will work if you custom machine and re-thread the shaft to accept regular props, but from the factory it's an odd-ball size. Add to that the fact that it's missing trim tabs, turn fins, motor mount, ect. and you can pretty much consider it a bare hull. In think I would actually prefer a bare hull to this one, since it has so many holes/vents to deal with, but the price is nice. I think I paid closer to $300 for mine...I don't really remember though.
Here's a pic of the transom of that boat if it were ready to run at a decent speed:
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
A member in our club has the eagle boat. It wouldnt handle the 2028 he had in it. There was probably still some tweaking left to do but he gave up. I agree. it takes big money to build a big boat. There are no real shortcuts. Budget and big boat dont go together. $800. will cover a good motor, decent esc and less expensive batteries.
dang it all i have ar hydro hulls and they are all 48's
Yes!
Big boats not only cost big bucks, but get ready to go through 4 boats worth of lipos in 3-4 minutes with a 50" boat. It's definitely not the most cost effective way to do FE boating...
As far as the Eagle boat, I'm surprised it didn't do well with the 2028. Maybe he just gave up too quickly? I ran a 5692 in mine and I felt like it could have used a bit more motor and lower kv/bigger prop. I ran a x457 on it and it was defintely on the small side, this was the first run:
Thats one cool boat, i remember when you first posted the vid..........i watched it several times....................such a monster, and the power is great for a 5692!!!!!!!!
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Thanks!
That build was about as "budget" as it gets for a boat that will move at a decent speed, and it was still not cheap. You still get close to 1k, even with budget builds (building it yourself).
Watching that video reminds me that it was my 5 year old girl behind the camera.lol. Such a good little helper! Now my 2 year old girl constantly asks to help building boats and want's her own "baby boat" to build.lol
You still got that Hog of a boat?????? Do I remember you trying to sell it????
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
I ordered a 54 inch mono from mmp it is called e Watersnake and then there is the Titus witch is a step down at 49 inches the quality of these hulls are extremely nice but if you r looking to save money I would not go nowhere near the 50 inch range whatever you build is not going to be cheap if you want a pretty fast reliable setup
my youtube videos http://www.youtube.com/user/chris81983?feature=mhee
did he ever settle on a project?
Gas Segad / Gas Rigger / Radtek carbon cat / micro fe rigger / fe ***** in work
If you're willing to come pick it up I have a 54" Arapaho that runs "scale" already built complete with a Leopard 5692 1000 kv, Turnigy 180 Marine esc. On 6s 2p it runs I'd guess in the mid 40's. $550.00 with LPU and it's yours. Or I'd sell you the hull & harware minus the motor & esc for $350.00
http://youtu.be/9TugurQ1_Pw
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Hey,
Hows it going, Where was that hull coming from for 16.00 ?
Last edited by lenny; 03-16-2012 at 08:16 PM.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
Last edited by Brushless55; 03-16-2012 at 08:32 PM.
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Bookmarks