need a boat

[toyman]

i am looking for a good deal on a boat. i am interested in a cat, rigger, or hydro. i am trying to get away from the v hulls but would consider anything else. pretty much open to any length above 25, even if it is large. not afraid of projects but would prefer somthing with hardware. i do not want to spend alot on this. i greatly apreciate any sugestions.

[madmorgan]

what do you consider alot?

[toyman]

Depends on what it is

[macdon]

I have a Joysway Surge Crusher Catamaran for $120 if you're interested. It has a 3660 2000kv motor and a servo. No esc as the Joysway 50a esc was not adequate.
Im from Manila, Philippines thou.

[bill34207]

I have a BIG Proboat Llumar hydro but shipping on it would hurt. It's a gas hull with most of the conversion to electric work done. Set up for a Castle 2028 (that I robbed to put into a Falcon cat). I'd take $220.00 plus actual crating/shipping cost for the hull & hardware.
Check here for photos. http://www.rcgroups.com/forums/showthread.php?t=1478759

[toyman]

I have a BIG Proboat Llumar hydro but shipping on it would hurt. It's a gas hull with most of the conversion to electric work done. Set up for a Castle 2028 (that I robbed to put into a Falcon cat). I'd take $220.00 plus actual crating/shipping cost for the hull & hardware.
Check here for photos. http://www.rcgroups.com/forums/showthread.php?t=1478759

i wasnt wanting to spend that much on only a hull. id still need some room to buy everything elese. dont think that would be an option.

[toyman]

I have a Joysway Surge Crusher Catamaran for $120 if you're interested. It has a 3660 2000kv motor and a servo. No esc as the Joysway 50a esc was not adequate.
Im from Manila, Philippines thou.

i might be interested in that , can i have specs on it.

[macdon]

i might be interested in that , can i have specs on it.

Manufacturer's page:
http://www.joysway-hobby.com/Product_show.asp?proid=477

There are many videos of this boat in youtube if you wanna check it out.