neu 1530 series motors

[RIPFENCE]

neu has expanded their line in the 15 series motors..there are a lot of really nice kv's in this series and capable of over 5000 watts!! i want a 1530 1y 1100kv for 8s will be very nice for my application...some really nice choices here i would order one now if i could

scroll down to the bottom for the 1530

http://www.neumotors.com/Site/1500_series.html

[Brushless55]

those look cool man!

[RIPFENCE]

i think they will be used if they become availiable..i have been searching for them and they are not around anywhere from what i have seen

[ray schrauwen]

All you have to do is order one from Steve Neu or ask Steve V. here at OSE if he can get you one.

That is a nice KV. I want a .5Y, lol...

[NativePaul]

Can you order form Neu again now, I have in the past but when I tried last year and the year before and they told me I had to go through Castle Creations due to some deal they had signed with them. Not an answer I liked so I ended up buying 2 leopards, a Lehner, and a used Neu.

[RIPFENCE]

i looked around and neu has a clearence section with several choices but i did not see a direct order for the motor of your choice...castle creations does not have it on their site yet

[RIPFENCE]

talked to lisa at neu and you can order these direct..i am waiting on a price but i thinks its going to be well over 320.00

[Make-a-Wake]

Wow, these outta power up to 40" hulls well. The 1530 is 40 x 108mm in case anyone is wondering, pretty darn long.

The 1355kv model would be a nice 6s motor with a larg-ish prop, and the 1010 or 1100kv would be great on 8s.

[Brushless55]

could be a short amout of time till we see a TP version....

[ray schrauwen]

Well, Ben has a custom 4092 that is close but, no cigar. Plus it was a custom wind of 1600kv only at this time...

[Drax21]

Well, Ben has a custom 4092 that is close but, no cigar. Plus it was a custom wind of 1600kv only at this time...

Yeah I was looking for a 2000-2200kv version.
I see the Neu 1530 has one just over 2000kv - price a bit scary atm

[RIPFENCE]

the price is 335.00 ouch! if its any consulation they only expect half the payment up front and the rest when the motor is ready to be shipped..maybe the tp4092 is the way to go..but man i like the neu's..

[Steven Vaccaro]

Well, Ben has a custom 4092 that is close but, no cigar. Plus it was a custom wind of 1600kv only at this time...

Ray the TP is not even close to the power of a Neu 1530.

[Steven Vaccaro]

I have had these 1530 motors on order, just waiting for them to show up.

[Brushless55]

I have had these 1530 motors on order, just waiting for them to show up.

Hey Steven, what will be the price and also what kv ratings can you get?
Thanks

[Steven Vaccaro]

Here is a link to the item

http://www.offshoreelectrics.com/sea...sman=&x=44&y=7

[RIPFENCE]

I have had these 1530 motors on order, just waiting for them to show up.

freakin sweet!!!

[RIPFENCE]

so what would be a good size mono and cat hull for this motor? for 60 plus speeds...i am thinking hulls in the 40-45 inch range?

[Drax21]

so what would be a good size mono and cat hull for this motor? for 60 plus speeds...i am thinking hulls in the 40-45 inch range?

I would go for the 35 to 38" range. It's only a bit longer than the 1527 you have in your DF Pirate

[Steven Vaccaro]

40" monos shouldn't be a problem. Cats are a different story. Not all 40" cats are the same. Some are wide tanks, some are narrow.

[RIPFENCE]

10-4

wow you just hit 7000 posts!!

[Steven Vaccaro]

wow you just hit 7000 posts!!

YAHOOOOOOO. What did I win??????

[RIPFENCE]

mega millions would be nice now wouldn't it..i woul get a 1530 for everyone on the forum

[Steven Vaccaro]

i played my $10 bucks. Now to sit back and wait for my numbers to come out tonight.

[LarrysDrifter]

YAHOOOOOOO. What did I win??????

A job at OSE.

[Drax21]

A job at OSE.

I had to laugh at this