P1 kos 35" offset rudder.

[lenny]

With the offset rudder mod,
The rudder is 1 1/2" offset from the stinger to the starboard side.
I made a aluminum off set plate that is 2mm thick and 24mm wide and 53mm long,
Than drilled 4 hole for the mounting screws after I traced the stock mounting holes to the plate.
Two for above the stock stinger rudder mount holes that I used longer screws and nuts for,
And two to mount the stock rudder bracket too with the two stock screws that were for it.

More pictures,P1 35 KOS 010.jpgP1 35 KOS 011.jpgP1 35 KOS 012.jpgP1 35 KOS 013.jpgP1 35 KOS 014.jpg