Anybody interested in 6.5mm CC bullet caps/plugs?

[Rich]

All my trucks and boats use the CC 6.5mm bullets so I have 50+ connectors. Just the other day I put two lipos in my jacket pocket with the wires hanging out and seconds later I heard a crack and a bright light; I knew what that was. The two wires had made contact with my keys that were clipped to my jeans. With that being said I searched for some options to prevent this during transport and for storage I have some pics attached. There are two styles for the male and female. I am hoping Steve will maybe consider stocking them?

[Rich]

Nobody! I am surprised??!

[detox]

Not enough info. What did you use? Automobile Vacuum plugs?

[Rich]

Not enough info. What did you use? Automobile Vacuum plugs?

Here is the one that covers the female battery end. http://www.alliance-express.com/mss/...x=0&Submit.y=0

[drwayne]

Innovative way to protect silly people from injury.

[Rich]

Plus i figure for transport in the lipo bag. I have tried some and they work great. All my 6.5mm bullets have them now. Just thought if anybody was interested but I guess not.....

[veejo]

The possibilty of shorting in toolbox is one reason I steer away from bullet connectors, I chop then off or plug deans convertors in as soon as I get them. Though I appreciate the current capability of 6.5 bullet. I'm giving XT60 (4mm) serious thought and phasing out my Deans for both cars and boats. I know Hobbyking ship 6.5mm on their 5000mah 2s packs. I either chop of the bullet or use an adapter as soon as they arrive as my charger doesn't have 5.6mm plugs.

[Gimp]

I just keep a rubber band on my batteries. If they aren't in the boat, the leads are rubber banded to opposite sides of the battery.

[drwayne]

Hi Rich
What cost 20x female caps to Au ?
Alliance wont ship 'downunder'
W

[Rich]

Hi Rich
What cost 20x female caps to Au ?
Alliance wont ship 'downunder'
W

Can you pm me the address? I'll look into it for you

[drwayne]

Hi
Also lmk box 50+ or whatever is minimum bulk.
Thx
W

[drwayne]

Ive a m8 in Queensland Australia who just fused a pack in the back of his car driving to the pond !.. stinky business !

got PM Rich, am checking specs.

[Rich]

Great! Ill get back to you on the shipping. That sucks about the pack going up in smoke! This is the reason why i decided to find these caps..

[Chrisg81983]

I just use some heat shrink I dont heat about 1/8 inch from the end so it has a slight flare at the end so it easily can side over the connector then I pinch shut the other end while hot I never had a short/spark yet it works great and is cheaper than the vacume caps / bolt thread protectors