If this is your first visit, be sure to check out the FAQ by clicking the link above. To post questions and to view pictures, you will have to register by clicking here register : Important, Please make sure to add oseforum@offshoreelectrics.com to your safe senders email list. Otherwise the activation email may go in your spam box. Or to start viewing/reading the forum without having to register, select the forum that you want to visit from the selection below.

Welcome to The OffshoreElectrics (OSE) RC Electric Boating Forum!

Please take a moment to read this. OSE is a tight knit community of like minded rc boating enthusiasts who value "on topic" and clean discussions. You are currently viewing our forum as a "guest". A guest will not be able to post questions or view pictures and videos.

Registration is fast, simple and absolutely free. Please click here to Join now.

By joining our free community you will have access to post topics, create your own image gallery to share with everyone, communicate privately with other members (PM), respond to polls, upload content and access many other special features.

If you have any problems with the registration process or your account login, please contact us by clicking here.

Results 1 to 10 of 10

Thread: SuperVee, lost shaft and prop

Thread Tools
- Show Printable Version
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

12-07-2011, 06:58 PM #1
Smoothops

View Profile

View Forum Posts

Private Message

It is never fast enough..
Join Date

Apr 2011

Location

OH

Posts

128
SuperVee, lost shaft and prop

So I ran my boat one last time before the snow flys and I lost the whole shaft and my 42x55 prop. I have a stock MG motor and esc,running two 2s question is was that to much motor for the stock flex cable? It was greased well and ran about 6 mins, then i just heard the motor spining in the middle of the lake. Here is my video before breakage>>>http://www.youtube.com/user/johnnysm.../0/Tam5Z1wXl1w

Last edited by Smoothops; 12-07-2011 at 07:11 PM.

Reply With Quote