Results 1 to 3 of 3

Thread: Method for changing the prop

  1. 12-03-2011, 10:14 AM #1
    cgd2175
    cgd2175 is offline Member
    Join Date
    Jun 2011
    Location
    PA
    Posts
    51

    Default Method for changing the prop

    Hello, normaly my boats have a Collet from the motor where i use a wrench to not allow the drive shaft to spin, and then from the prop i unscrew the nut.
    But I just got my Impulse 31 and the coupler collet is cylindrical, any suggestion or the way I should do it?

    And the drive drog is fixed to the flex shaft?

    Thanks
    Chris
    Reply With Quote Reply With Quote
  2. 12-03-2011, 05:23 PM #2
    G-UNIT's Avatar
    G-UNIT
    G-UNIT is offline Senior Member
    Join Date
    Nov 2009
    Location
    FL
    Posts
    949

    Default

    I changed the stock collet out for one from octora and make my own flex cables. then I dont have to bother finding the flat part of the flex cable when reinstalling it with the stock collet.
    Reply With Quote Reply With Quote
  3. 12-05-2011, 09:21 AM #3
    cgd2175
    cgd2175 is offline Member
    Join Date
    Jun 2011
    Location
    PA
    Posts
    51

    Default

    Hello G-Unit, I just do the same, is the simplest and secure way!
    Thanks
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules