Results 1 to 6 of 6

Thread: "STILL" having problem finding prop I need

  1. #1
    Join Date
    Sep 2011
    Location
    TX
    Posts
    22

    Cool "STILL" having problem finding prop I need

    Come on guys,
    Someone must know where to go. Im looking for a two and a three blade bronze or stainless prop with about the same specs as a Octura X460 Or a Prather 250 or 255. That is 60mm Diameter and from 3.305 to 3.340 ratio. The problem I'm having is finding something with a 1/4" bore size. Octura and Prather props in the size I need are all .187 bore sizes. I contacted some dude at VooDoo about four days ago and he told me to call him back at between 4:30 and 5:00 pm later that same day. I did as he asked, never got an answer back, called three more times over the next three days while leaving my name & number each time and asking to please return my call. Nothing!

    Thanks Guys,

    Will

  2. #2
    Join Date
    Sep 2011
    Location
    Oz
    Posts
    286

    Default

    Why don't you just get a bigger prop with a 1/4" shaft, turn it down and have it shaped and sharpened from there?
    6boost Turbo Manifolds, Australia's number 1 turbo kit specialist and manufacturer

  3. #3
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    7,664

    Cool

    No one knows where to tell you to go because no one bothers to even make dinky props for 1/4" drives - there is no market. And don't cut down bigger props! A far easier solution is to get a 1/4" cable with a step down on the stub shaft to 3/16". That is what all us FE boaters with 1/4" cable drives do. Simple, and it allows for an almost unlimited number of props to be used.


    .
    ERROR 403 - This is not the page you are looking for


  4. #4
    Join Date
    Mar 2008
    Location
    Ca
    Posts
    943

    Default

    Also propshop props have the sizes your looking for.

    Mark

  5. #5
    Join Date
    Sep 2011
    Location
    TX
    Posts
    22

    Default

    Thanks man, but I found what I was looking for from Bonzi sports.

    Thanks,

    Bill

  6. #6
    Join Date
    Dec 2010
    Location
    NY
    Posts
    2,591

    Default

    I can cut down a SS 6514 for you if you need

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •