Griff I beleive the slop in ur drive is the problem mine went the same way after about 5 runs, I just teplaced it with the hyperformance one no more problem's also I did the brass stuffing tube and removed the teflon tube this made things run more freely, just remember to oil/grease the flex shaft regularly as well as the drive then there should be no more problems, another thing to check is the amount of freeplay on the flex shaft, also check where the shaft comes through to both the motor collett and the drive shaft darin reconmends you open the holes up to give some wiggle room. Hope this helps.
Socal Fe member, miss gieco castle 1515 1y t-180, blackjack29 stock,insane FE30 p sport castle 1515 1y t-180, insane FE30 p spec ul-1 motor t-120, insane 34"mono neu 1521 1.5d t-180
Bookmarks