Also the White coating around the driveshaft is flaking off

[lonneyb]

I have some of the white plastic stuff flaking around the Stuffing tubeshaft...The boat hasnt even hit
the water yet....Is this something that is detrimental ? or more for looks?

[lonneyb]

I tried the boat out today did the silicon thing sharpened and polished the prop ...Replaced the MR200 with a MR3000 ....I put 5.5mm
bullets on the ESC and 4.5mm bullets on the motor......Dropped in 2 Turnigy 6000mAh 25c-50c 4 cells ..Just hooked 1 up at a time...used the other to balance it out.......... Taped the front and back of the hatch ...ran her ...Dry as a bone inside!!!! ....and worked really well...I noticed it doesnt turn well untill shes up and going...and she sprayed a helluva rooster tail hahahah...only wah wah wah'd when i hit my
wakes...other than that when i pinned her she had a steady rising whine to her..no wah wah's