Originally Posted by
Mtwinste
Well I've probably run this boat 20 times or so and it seems to be taking one battery below 3V and leaving the other around 3.4V. Sometimes the balance is closer. But most times it's a difference. Especially if I let the ESC cut me off. I've been running Gens Ace 6600mah 2S 65C and Orion 5000mah 45C. Two of the same battery each time of course.
Is this due to a difference in soldering techniques from each connector or is it normal or what? Tonight I ran my Gens Ace and one read 2.9V!!!!! And the other 3.4. The low didn't puff but dang it must be close!
The setup is totally stock.
The solder joint shouldn't cause that kind of issue. The way the esc is wired for two packs shouldn't cause the problem either.
Did you buy the packs at the same time and Did you always run your packs together as pairs?
Steven Vaccaro
Where Racing on a Budget is a Reality!
Bookmarks