Results 1 to 5 of 5

Thread: Impulse on 3S what do I need?

  1. #1
    Join Date
    Jul 2011
    Location
    Al
    Posts
    134

    Default Impulse on 3S what do I need?

    I want to run the impulse 31 on two of these batteries: max amps Race Edition LiPo 6500 3-cell 11.1v.

    What motor and ESC will I need to run these batteries after I burn up the stock stuff using them?

  2. #2
    Join Date
    Jun 2009
    Location
    CA
    Posts
    940

    Default

    You need around a 13-1500kv motor and a 6s esc like swordfish 240hv or hydra ice 200hv. If you haven't bought those packs already I wouldn't waste my money. Your better off with some cheap turnigy or gens ace packs.

  3. #3
    Join Date
    Jul 2011
    Location
    Al
    Posts
    134

    Default

    Too late already ordered them.
    Why can't I use the stock 1800kv motor?
    Which ESC you recommend getting?

  4. #4
    Join Date
    Jul 2011
    Location
    Al
    Posts
    134

    Default

    Nevermind. I see you named them. Thanks!!

  5. #5
    Join Date
    Mar 2010
    Location
    MA
    Posts
    3,573

    Default

    You can use stock motor, just be prepared to blow it up. 6s on that motor = 39000 rpm. That's too much for anything more than 1 minute or so tops, and even then it's way to much. Your target rpm should be 25000- 35000 rpm

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •