SV27 strut

[4.6mustang01]

I was going to use an SV27 strut and bushing for my build. i didnt know if the supervee strut will fit any 3/16" prop shaft no mater what your cable size is (in my case Octura .130) or do you have to have a .150" Cable or whatever the stock supervee cable is for it to work?? I am using a 7/32" brass stuffing tube. Can anyone answer my question please?

[makin' waves]

Not too sure mate?

But i would stick to the .150 size cable as its the one that comes original with the boat.

You could always try the .130... let us know what happens!

Have fun mate

Tone

[Steven Vaccaro]

I was going to use an SV27 strut and bushing for my build. i didnt know if the supervee strut will fit any 3/16" prop shaft no mater what your cable size is (in my case Octura .130) or do you have to have a .150" Cable or whatever the stock supervee cable is for it to work?? I am using a 7/32" brass stuffing tube. Can anyone answer my question please?

the stuffing tube runs into the strut and acts as an outer sleeve to the strut bushing. it needs 1/4 to work.

[4.6mustang01]

thats what i needed to know thanks steven