I normally dont push my setups hard because we dont race much, so I'm looking to gauge whether or not I can use seaking 180 with a p mono setup.
Boat is a delta pirate knockoff with a 4082 2200kv motor.
I normally dont push my setups hard because we dont race much, so I'm looking to gauge whether or not I can use seaking 180 with a p mono setup.
Boat is a delta pirate knockoff with a 4082 2200kv motor.
Steven Vaccaro
Where Racing on a Budget is a Reality!
Steven, I use my 180 with a Neu 1527 1D on 4s and 6s. I finally burnt it up on 6s and a saw set up so 4s is no problem. I think these are strong contollers for the money.
Mark
Steven, Hi !!
I run the Seaking 180 on my Insane 34" P-Mono setup with a Neu 1521 1.5D
(1900KV) spinning a 450/3 mildly tweaked by Mr. Sholund. The boat weighs 9.5 lbs rtr. After @ 2.5 min the motor is barely warm, the T180 is maybe 120 deg & the Etti cap board is @ 130. Mark F has run the same setup before with a 1527 on 4S with no probs with the SC (other than setting the LVC to "NO LVC" and cell count to autodetect) I have no hands-on with the 4082, but the T180 has proven rather nice on 4S- I even use the built-in bec.
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
I run the 180 in my DF33 P-mono. I use a 1521 1.5D and a CMDI 5083 x3blade prop.
Sheyaaa! it hauls. The prop is really high compared to other P-mono's.
The caps get hot and I'm going to add more before I take her out again.
My temps are similar to above post by PropChopper.,
Nortavlag Bulc
I run a T180 in my 39" DF knockoff(Vader) with a 1717 on 6s with an x447...........no problems. Had to prop down from x450 as weather warmed up.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: https://forums.offshoreelectrics.com/...est!&highlight=
These speedos sound like tanks!
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
I run a T-180/etti cap bank in my P-mono with 1515 1Y. Did great last season.
IMPBA 20481S D-12
Been running 4082 1500kv on 6s in a DF33 & X648 for well over 6 months , with not a problem , i LOVE these ESCs , good bang for your buck , oh i had the BEC disconnected since new . Did fit extra caps , and a cooling mod .
UL1- 1515 castle/neu / 240 swordfish
SV27- with UL1 running gear
33 Delta Force - 1521-1.5D/Neu/ 240 swordfish/4S2P
Thanks for all the info guys. I added some caps like you did Scoota. It seems the easiest and cleanest way to do it.
Steven Vaccaro
Where Racing on a Budget is a Reality!
What size caps did you use in those pics scoota? Steve do you have the caps?
Steven Vaccaro
Where Racing on a Budget is a Reality!
Bookmarks