Results 1 to 3 of 3

Thread: SeaKing 180A esc version 1/ version 2?????

  1. #1
    Join Date
    Jan 2009
    Location
    ok
    Posts
    914

    Default SeaKing 180A esc version 1/ version 2?????

    what is the deal with this version 2 thing? How do I know if I have a version 1 or 2?

    What are the differences in the 2?

  2. #2
    Join Date
    Nov 2009
    Location
    WA
    Posts
    2,038

    Default

    Hmmmm,..........no one has answered this? I know a bunch of you guys have the answers he's looking for? Let me speak first for the crowd who does know the answers. They must be Ebaying or something.

    The major 2 differences I am aware of is the first version had the wires soldered directly to the PC board where as the V2 has a form of bullet connector peened and soldered directly to the board. This was because the first version had some issue with the wires becoming unsoldered during high amp situations and then the esc would smoke due to single phasing.

    The second difference is the caps used. First version had 35 volt 470mfd caps where as the V2 has 35v 1000mfd caps.

    I bet I missed some other differences. Step up to the plate guy's. Batter up!

    John
    Last edited by m4a1usr; 04-19-2011 at 12:20 AM.
    Change is the one Constant

  3. #3
    Join Date
    Jan 2009
    Location
    ok
    Posts
    914

    Default

    Will ck mine tomorrow and thanks. Also, is there a remedy for the soldering issues?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •