Mini-V Re-Build

[Seacraftarioch]

Im going to be doing a rebuild of my mini-v and just wanted to check my shopping list:

Esc: Seaking 35a brushless watercooled

Motor: Airfield rc 70mm 2600kv brushless

Servo: T-pro mg9os 9g metal gear servo

Radio: FlySky FS-GT2 2.4g 2ch

Rudder/strut: OSE Micro Hardware system http://www.offshoreelectrics.com/pro...prod=ose-80972

Flex Cable: Octure .098 cable system http://www.offshoreelectrics.com/pro...oct-oc098L-24c

Coupler: Octura 1/8" to .098 http://www.offshoreelectrics.com/pro...oct-ocfhe18098

Still need a prop and a new steering boot but how does this list sound to all you experts?

[G1ST]

Please post your results of your set up.
I'm curious to see how the inline micro hardware performs.
A lot of the builds I've read about used offset strut and rudders.

[Alexgar]

I had a 28x47 3100 kx inrunner in mine what are you putting in

[G1ST]

Alex
I ran the Mini V I got from you for the first time today. What a blast!
Talk about rediculously overpowered. Oh Man.
Thank you for feeding the addiction.
Greg

[G1ST]

Seacraftarioch
Have you made a decision on your hardware yet?
I think I'm going to start with the .098 Flex with .125 prop shaft going into the stock steerable outdrive. I'll probably order an X427, X430 and the 431 and 432 in plastic.
right now with the stock prop I'm getting torque roll from 1/2 throttle on up. Maybe the smaller X427 will help tame that. Hopefully I can prop up from that.

Greg

[bbosncali]

I had a novak mongoose 380 13.5 in my talk about over powered way to much power.

[baja flyer]

Would this motor work???? http://www.hobbyking.com/hobbyking/s...dproduct=11875

[G1ST]

Would this motor work???? http://www.hobbyking.com/hobbyking/s...dproduct=11875

Dimensions and KV will probably work but an outrunner wont work in the stock mount. You would have to modify the inside of the hull and come up with a mount.
Nothing is impossible
Greg