Page 1 of 10 123 ... LastLast
Results 1 to 30 of 297

Thread: motor mount

  1. #1
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default motor mount

    hi all

    if some of you are interested, i'm milling aluminium motor mount.
    i mill first one for a friend, and now i have several different model.

    - 5692 (4")= 70$
    - 5692 5" = 70$
    - 5692 + esc plate = 75$
    - CC2028 (5") = 70$
    - CC2028 (4") = 65$
    - CC1717 floor mount = 60$
    - CC1717 (4") = 55$
    - CC1520 floor mount =58$
    - leopard 40xx = 39$
    - leopard 2435 = 20$
    - NEU 1521 4" + esc plate = 49$
    - NEU 1521 = 45$
    - NEU 1527 / 1524 = 47$
    - NEU 2230 5" = 70$

    and small one for 26mm outrunner (19 mm between screws) with integrated water cooling (18$)


    international shipping cost for up to 300gr parcel
    with tracking : 35$
    without tracking : 15$
    without tracking economical : 10$

    so don't hesitate to contact me

    herve
    Attached Images Attached Images
    Last edited by cacofonix; 06-18-2012 at 07:54 AM.

  2. #2
    Join Date
    Aug 2010
    Location
    ON
    Posts
    461

    Default

    How much would it be for the water cooled outrunner mount?

  3. #3
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi wparsons

    for what type or brand of motor ??

  4. #4
    Join Date
    Jan 2011
    Location
    BC
    Posts
    597

    Default

    how much for the 5692 and the 1717 mount?

  5. #5
    Join Date
    Aug 2010
    Location
    ON
    Posts
    461

    Default

    A 450 size outrunner (28mm), I think they have 19 and 25mm spacing but it might be 16mm and 19mm.

    Like this one:

    http://www.hobbyking.com/hobbyking/s...dProduct=11177

  6. #6
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi

    with current version, max ø motor is 26 mm
    and 19 mm between screw holes.

    but it can not take long to make a larger one !!

    herve

  7. #7
    Join Date
    Apr 2011
    Location
    va
    Posts
    1,228

    Default

    Requesting motor mount for Neu 1527 going in a H&M 36" Mono(no Rails).
    What is your leadtime and price? Thanks, Joe

  8. #8
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi rcbidder

    thanks for asking
    this motor mount will be a little longer than 1521 one
    so price is same 50$

    for leadtime ..... i can ship it w19 (i'm visiting in-laws next week ......)

    herve

  9. #9
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi there

    for those who are interested
    here is NEU 1527 mount first 3D view

    i have to check there is no problem with water fitting
    when adjusting angle
    max angle is 23°

    i'm also working on CC2028 mount too big

    herve
    Attached Images Attached Images

  10. #10
    Join Date
    Jan 2010
    Location
    NC
    Posts
    2,498

    Default

    Hey i have a theme going in my boat,,,do you think you can do a servo mount for the Hitech low plrofile servo and how much shipped to 27549 US.

  11. #11
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hello hydrojerry

    have you already think to a particular design ?
    otherwise i have something for you

    i will post pictures soon

    herve

  12. #12
    Join Date
    Jan 2010
    Location
    NC
    Posts
    2,498

    Default

    Sorry for the late reply, so show me some pics and well talk,, my boat is all CF and my motor mounts are shinny aluminum so iwas thinking a aluminum servo mount would look cool,,so let me no. PS its a low profile servo so it will be standing up no turned on its side like others ive seen..

  13. #13
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi jerry

    here are pics

    herve
    Attached Images Attached Images

  14. #14
    Join Date
    Jan 2010
    Location
    NC
    Posts
    2,498

    Default

    did you say the first pic left to right was for a lowprofile servo??

  15. #15
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    no no

    i don't have specific mount for low profile
    first pic is standard servo mount
    2nd and 3 rd, it's also a standard servo mount i design for maritmo hull.

    but it will fit with a low profile mounted on top (not reversed as shown on pics)


    herve

  16. #16
    Join Date
    Jan 2010
    Location
    NC
    Posts
    2,498

    Default

    OK so the 2nd and third pics with the servo bolted on the top side, not upside down will work for a low profile servo, is that correct,,,

  17. #17
    Join Date
    Mar 2009
    Location
    MI
    Posts
    511

    Default

    I will take a mount for a 1527 and a 1521 mount please. shipped price to USA Zip code 48917.

    Pm me with a total and delivery time.

    Thanks,
    Kevin

  18. #18
    Join Date
    Oct 2008
    Location
    CO
    Posts
    9,488

    Default

    very nice mounts man
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

  19. #19
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi all

    thanks a lot

    @jerry : yes !!
    i will take more pics next sunday when i will be back home
    i have a low profile servo to check .

    @ksheren : ok
    i'm not at home until sunday so i answer you next monday

    herve

  20. #20
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hello

    updated first post with shipping cost
    just want to know if there is a specific custom policy
    with parcel from france.
    because i have to fill a form and declare what is in parcel

    herve

  21. #21
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi there

    many mount are almost done (1717 / 1521 / 1527 ) !!
    pictures tomorrow !!!

    herve

  22. #22
    Join Date
    May 2008
    Location
    AB
    Posts
    1,464

    Default

    Nice work Herve.................
    Necessity is the mother of invention.............

    Youtube Video's http://www.youtube.com/user/Titanis2000

  23. #23
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    i'm your padawan :0)

  24. #24
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hello

    done !!

    first pic : Neu 1521 and 1527
    2nd pic : The familly

    i'm working on CC2028 rail mount (4")
    and next one will be CC1717 rail mount also

    herve
    Attached Images Attached Images

  25. #25
    Join Date
    May 2008
    Location
    AB
    Posts
    1,464

    Default

    Very very nice Herve , Hey what program do you use to control your mill . I use Mach3
    Necessity is the mother of invention.............

    Youtube Video's http://www.youtube.com/user/Titanis2000

  26. #26
    Join Date
    Jan 2010
    Location
    NC
    Posts
    2,498

    Default

    Those are frickin sweet nice work!!!!

  27. #27
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    thanks guys

    @peter : i also use mach3 , most popular cnc software in the world
    lot of features, even if i don't use most of them

    @jerry : i'm also working of servo mount

    herve

  28. #28
    Join Date
    May 2008
    Location
    AB
    Posts
    1,464

    Default

    Herve here is a servo mount I make and use , feel free to copy it if you want . one is for 4.0" stringers and the other is for 5.0" stringers
    Attached Images Attached Images
    Necessity is the mother of invention.............

    Youtube Video's http://www.youtube.com/user/Titanis2000

  29. #29
    Join Date
    May 2008
    Location
    TX
    Posts
    1,744

    Default

    Herve, So I am in. How much do I need to Paypal you for a Neu 1521 floor mount? Looks like $50.00 + 15.00 shipping = $65.00. Please send me your paypal address and I will send you the $'s.

    My address is below if you want to double check the shipping.

    10 Barlow Court
    The Woodlands, TX 77382

  30. #30
    Join Date
    Jul 2008
    Location
    fr
    Posts
    240

    Default

    hi electric

    you are right 65$

    i'm not familiar with US address, no name is needed ?

    herve

Page 1 of 10 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •