Page 3 of 3 FirstFirst 123
Results 61 to 65 of 65

Thread: Turnigy 180 cooling upgrade

  1. #61
    Join Date
    Jun 2012
    Location
    OZ
    Posts
    218

    Default

    Quote Originally Posted by Steven Vaccaro View Post
    Does the Tygon tubing give enough flexibility?
    It does for me Steven, please define "enough" ?
    Might be interesting to know that after I cut my hoses to length, I throw them in a bowl of very hot water. They gain some flexibility and seem to keep this even after cooling down. A better grip on the water nipples as well.

  2. #62
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    thanks for the info
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  3. #63
    Join Date
    Jul 2012
    Location
    Wa
    Posts
    867

    Default

    I have these esc's running in my 42'' cat pushing 3674 2200kv. I have read that you can run them on 8s. I would like to try this. I have 1S-8S Lipo Battery Tester Low Voltage Checker Indicator LED Buzzer Alarm RC

    $(KGrHqYOKpMFG6z)Qn85BR)7Vmu3Z!~~60_57.jpg I bought a pair of them.180 amp esc turnigy 007.JPG180 amp esc turnigy 008.JPG

    I want to know what you think and this cooling that is done because of this? I have no cooling problems or problems at all on 6s. I use the Nano-Tec 65-130c liops.
    What are your thoughts with the HK nano tech high discharge lipos?
    Thank you.
    twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!

  4. #64
    Join Date
    Jul 2012
    Location
    Wa
    Posts
    867

    Default

    Product Feature: 1-8SBB3.jpg

    Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe


    Voltage detection pricision: 0.01V


    Unit voltage display range: 0.5V-4.5V


    Total voltage display range: 0.5V-36V


    1S test mode voltage range: 4-15V
    Low voltage alarm mode for 2-8S


    Alarm set value range: OFF-2.7V-3.8V


    When the voltage is below the set value,it will buzzer with red LED light,pre-set value 3.3V.


    Push key
    twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!

  5. #65
    Join Date
    Jun 2010
    Location
    Mi
    Posts
    738

    Default

    here is what I did to my T180 heat sink

    The original, featuring broken water connectors!!


    I milled most of the center out


    finished part


    assymbly


    finished heat sink
    Cheetah, Super Rio, (Mod) Starship (Mod and sold),

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •