I am in need of cheap motor & esc for recovery boat I am planning to build.
Brushed or brushless I am open to both.
If you don't have both motor & esc still looking for either one so let me know what you might have.
I am in need of cheap motor & esc for recovery boat I am planning to build.
Brushed or brushless I am open to both.
If you don't have both motor & esc still looking for either one so let me know what you might have.
OSE GIFTING ELF
HAPPY HOLIDAYS!!
Check my two post in the swap shop I have both
Looking for something cheaper then that hoping to keep it around 20-$30 for everything.
OSE GIFTING ELF
HAPPY HOLIDAYS!!
If look for a brushed setup then
Its a 540 size motor. 15t that we used in my sons slash for a short while before upgrading to brushless.
I also have a 770kv castle outrunner (I dont remember the model number but its slightly shorter than a 540 inrunner and slightly larger diameter.). The only EXTRA brushless esc I have is a 30A 16.8V max and its a air model so its not water cooled and would need a pistix. That would put you at a very low rpm with that motor...just depends what you are trying to do.
OSE GIFTING ELF
HAPPY HOLIDAYS!!
Do you think the XL5 esc could handle 2 540s?
OSE GIFTING ELF
HAPPY HOLIDAYS!!
Last edited by monojeff; 03-28-2011 at 01:24 AM.
OSE GIFTING ELF
HAPPY HOLIDAYS!!
I have gotten what I need thanks
OSE GIFTING ELF
HAPPY HOLIDAYS!!
Bookmarks