Results 1 to 4 of 4

Thread: minicat micro hydro cog

  1. #1
    Join Date
    Jan 2011
    Location
    BC
    Posts
    83

    Default minicat micro hydro cog

    hey guys i have a micro hydro from minicat usa, and was wondering where the center of gravity should be?
    thanks for your help.

  2. #2
    Join Date
    Apr 2007
    Location
    Wa
    Posts
    5,905

    Default

    probably .5 to .75 of an inch behind the back of the sponson
    "Our society strives to avoid any possibility of offending anyone except God.
    Billy Graham

  3. #3
    Join Date
    Aug 2010
    Location
    uk
    Posts
    2,887

    Default

    Minicatracing has this info on there site, Top of the page on the left hand side click on downloads then go down the next page to Micro Hydro instructions & its their. 6.1" in from the transom to cog. Thanks Martin.

  4. #4
    Join Date
    Aug 2010
    Location
    ON
    Posts
    461

    Default

    Anyone have a boat and ruler handy? I'm curious how close to the sponson trailing edge 6.1" from the transom is. I know larger hydro's run best with the CG on the turn fin, but not so sure about tiny boats.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •