This motor is a 4 pole motor. One of the copies like all the rest out there. ALL of the memtioned motors are probably copied from the only licensed Neu design in the world. The Castle Creations motor.
And in the end, if you want the best of the best and the Original, buy a Neu Motor!
Steven Vaccaro
Where Racing on a Budget is a Reality!
so is this motor no good?
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
The motors fine. But you have to realize its not a Neu. None of them are. There is a reason no one can keep Neu motors instock. They perform at maximum levels and take abuse.
Steven Vaccaro
Where Racing on a Budget is a Reality!
I don't think anyone is comparing them to a NUE, that would be, uh not so smart
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
I have not run mine yet, but to chime in my $.02... I will agree that the soldering was less than I expected. Basically, the wires were tinned and then heated to the bullet w/ no other solder added. I re-soldered and will run it but not w/ a 45mm prop. I feel that may be a bit large for the KV. Im going to start w/ a 640 and go from there.....
Still have not run mine, but since Osprey hasnt chimed in yet after todays event, I will. Both he and I got Pursuit monos this past week. We raced today (club races) and although not getting eagle tree data and gps data, we did get temp comparisons.
My set up, Ettis 150 opto, stock Pursuit prop which is about a 42mm and a Leopard 4082 2200KV.
Ospreys set up, same boat, same prop T-180 and the OSE 2364 4074. By the looks of it, he ran a bit faster (within a mph) than me. Motors were about the same temp... actually his was a tad cooler than mine I believe. And MY boat was running looser than his. He ran the heck out of it for 3 runs... maybe we did 4, I cant remember. But he had no issues what so ever and the boat(s) hauled the mail! Im installing mine this week.
(Both of us re-soldered the bullets)
Hi Scott, do you know what timing was used?
IMPBA 20481S D-12
I do not. Hopefully Osprey will chime in soon, if not, shoot him a PM.
Nice prop avatar!
Do you have any more left steve I will take 1 thanks chris
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
ping
Nortavlag Bulc
I'll have a bunch more and different winds the beginning of April.
Steven Vaccaro
Where Racing on a Budget is a Reality!
Bookmarks