Does anyone have a pdf of the programming instructions for the Turnigy Marine 120A ESC?
There is nothing on the HobbyKing website in the "files" section for this ESC.
Does anyone have a pdf of the programming instructions for the Turnigy Marine 120A ESC?
There is nothing on the HobbyKing website in the "files" section for this ESC.
I believe that the SeaKing card is the correct one for the Turnigy Marine Series. The other pdf is for the HiFei Swordfish/Aquastar(Turnigy) Series.
Thanks!
I have the turnigy 180a with the hobbbywing prog card and works perfect.
Same company with other name
I just got a Turnigy Seaking ESC and I am going to use it in a ProBoat Miss Geico with a ProBoat 1800kv motor. I need to know what to set the timing at, it comes with a default set at 15 degrees. Is this right, to high or to low?
Almost forgot, will be running 4s2p 4000mah lipos.
Thanks!
geico motor is a 1500kv i believe
thats probably the right timing
thanks for your reply but to be on the safe side I think I will start at 7.5* and work my way up.
let me get this straight ....the turnigy esc thats 120 amp can be programmed with the seaking card?....or am i spazzing here?
I just installed a turnigy 120 amp in me geico so im curious also
oh sweet news...im not sure where this esc is set at and seems to be used as a single unit not in serie, only had one wires to dean connector that i chucked and i set it up in series but havent got to test it any.....snowing here now....gonna be a long wait here.
Thanks again diesel
It's a breeze to do it with the card.
http://www.youtube.com/watch?v=act-jrhOZ4Q
Bookmarks