MHZ Mystic Study 7700

[domp444]

MHZ Mystic Study 7700

I really like the looks of this hull! There was only one pic on the MHZ site, so I emailed them and the owner sent me some more pics. Just thought I would share with you guys

[Rumdog]

WOW!! Me want!!

[Rumdog]

Similar to HPR's new mono..

[domp444]

Me too!! And yeah, it reminded me of that. But the HPR one has a longer transom overhang. I like that this one comes with a really nice paint job.

[RIPFENCE]

thats awesome...a nice canidate for the big castle 2028!!!

[H2OCamel]

Drooling lustfully!

[domp444]

I think it deserves a LMT with a Schulze, haha I am so making this my next project. Maybe. Hopefully.

[Jason4636]

I just bought one of these. Gonna power it with twin skyrc 528's(same as CC2028) an twin SF 300pro+

[iamandrew]

I want one

[Jason4636]

Since the post up above was saying there is no pictures of this hull. When I get mine I'll post up some pictures of it. My hull is being sent to Keith Bradley for a CF inlay inside the hull and on the underside of the hatch. He's also installing the 2 dual water inlets in the bottom of the transom and putting in the hatch bolt's(8 of them). Hopefully I'll get it in a couple of weeks. Then all the fun starts with mocking everthing up with some constuction paper to get all the inside shapes I want. Then transfer them all to CF plate.

The drive I'm going to run are the WD200 Scale-Strut 123 and rudder. Then after I'm done building it, I'm going to send it out to Steve Mills(PROPAINTER) to get it painted.

Here's my drives and rudder I'm going to run
drive123_final_mod.jpg35.jpg32.jpg

[iridebikes247]

This setup is pretty unreal

http://www.youtube.com/watch?v=wFhezzvEyy0

Would love to know what it tops out at with big props

[Jason4636]

Their was a build up on this boat, over in europe. In the artile it says 126.7 kmph. If you have google chroe you can translate it over to english. This is the boat that me the idea for my power setup. I'm using the same size motor, same drives,rudder. I will probably have trim tabs on mine. It will be 3-4 weeks till I have mine in my hands. But be looking for it in the build area. I'll take alot of pic's of the hull, cause that was one thing that almost made me not buy it. There wasn't that many pictures of it out there. But I talked back and forth with a couple of guys over in europe that has this boat and they love it. And I was given the link to the article on that silver boat.

Here's the write up and about 30+ pictures of that silver one being built.
http://www.powerboats.cz/lode/mhz-my...15-kw-4-37.htm