Results 1 to 16 of 16

Thread: Prop Diagram

  1. #1
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default Prop Diagram

    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  2. #2
    Join Date
    Jan 2009
    Location
    ca
    Posts
    842

    Default

    Broken tip on the left side?

  3. #3
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    I used a new prop, so it wasn't broke. I think it's the way I took the photo.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  4. #4
    Join Date
    May 2012
    Location
    IL
    Posts
    940

    Default

    Great explanation and picture Steve need to be in a Read this first Newbe and yes for everyone.

  5. #5
    Join Date
    May 2012
    Location
    IL
    Posts
    940

    Default

    Steven,

    Here is a copy of the latest Octura information sheet 9.2012 listing the Prop number, Diameter and then Pitch.

    Makes it easier for me to follow and then make a decision on which ones to order.

    Mike
    Last edited by Mike Caruso; 10-07-2012 at 07:39 AM. Reason: date

  6. #6
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    can you email it to me or try to attach it again?
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  7. #7
    Join Date
    May 2012
    Location
    IL
    Posts
    940

    Default Octura New Prop list 9.12

    9.12 Octura prop list.jpg

    Here you go Steven

  8. #8
    Join Date
    Nov 2016
    Location
    MI
    Posts
    44

    Default

    Trying to find where to buy a b/s x440/3 I think it is a stainless steel for my Miss Geico 29 v3 all stock

  9. #9
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    I just sent you a pm.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  10. #10
    Join Date
    Nov 2016
    Location
    MI
    Posts
    44

    Default Miss Geico 29 v3

    I just received two Octura X440/3 props and both of them seem to have the same problem, they will not fit the drive dog.
    it seems that one side of the slotted end of the prop is misaligned and if I removed about 1/16" from one side on the leading edge it would fit, but would be out of balance. what would you recommend.

  11. #11
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,693

    Default

    Quote Originally Posted by Fixitguy1 View Post
    I just received two Octura X440/3 props and both of them seem to have the same problem, they will not fit the drive dog.
    it seems that one side of the slotted end of the prop is misaligned and if I removed about 1/16" from one side on the leading edge it would fit, but would be out of balance. what would you recommend.
    Do you happen to have a picture? Sometimes the slots have to be opened.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  12. #12
    Join Date
    Sep 2012
    Location
    Tg
    Posts
    1,438

    Default

    Quote Originally Posted by Fixitguy1 View Post
    I just received two Octura X440/3 props and both of them seem to have the same problem, they will not fit the drive dog.
    it seems that one side of the slotted end of the prop is misaligned and if I removed about 1/16" from one side on the leading edge it would fit, but would be out of balance. what would you recommend.
    Use a 5/16" (8mm) od drive dog.
    NZMPBA 2013, 2016 Open Electric Champion. NZMPBA 2016 P Offshore Champion.
    2016 SUHA Q Sport Hydro Hi Points Champion.
    BOPMPBC Open Mono, Open Electric Champion.

  13. #13
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,382

    Default

    Yep use the little doggy.
    Nortavlag Bulc

  14. #14
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    8,009

    Default

    Removing material from the hub has less of an effect on practical balance than you may think. Removing 1/16" from the slot sounds like way too much however...


    .
    ERROR 403 - This is not the page you are looking for


  15. #15
    Join Date
    Nov 2016
    Location
    MI
    Posts
    44

    Default

    The drive dog slots are fine the tongue material is covering the the drive dog slot on one only

  16. #16
    Join Date
    Nov 2016
    Location
    MI
    Posts
    44

    Default

    image.jpegimage.jpegimage.jpeg
    Hope you can see this.
    Attached Images Attached Images

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •