castle 2028 monster motor

[Punisher 67]

I have two boats that have 2230 NEU,s and building a third with a Lehner 3080/7 . trust me 730 - 780kv is exactly where you want to be for 10 cells

My Sniper will do close to 70 just on ten cells with a 750 kv . the new castle is perfect in that arena

[Joe Ford]

They're in stock and shipping now. Some people already have them in their hands. :) And thanks brushless55! Little man will have a transmitter in his hands in no time!

[Brushless55]

They're in stock and shipping now. Some people already have them in their hands. :) And thanks brushless55! Little man will have a transmitter in his hands in no time!

[RIPFENCE]

They're in stock and shipping now. Some people already have them in their hands. :) And thanks brushless55! Little man will have a transmitter in his hands in no time!

sweet i will buy one this week..now all we need is some new hydra ice's for a great start to 2011

[bigwaveohs]

its here!!! and $300 too..sound expensive huh?!?! but wait a minute it can put out 10hp..which is a little less then the neu 2230 but at over half the cost!!

steven, time to get some water jackets going on this beast..

http://www.castlecreations.com/products/2028_motor.html

Be afraid, be very afraid...LOL

[raptor347]

I'm warming up the Grim Reaper gas rigger molds. The 2028 on 10S in a gas rigger should be outragous.

[Brushless55]

I'm warming up the Grim Reaper gas rigger molds. The 2028 on 10S in a gas rigger should be outragous.

that would be sweet!

[Punisher 67]

So whats your take on this motor Brian....is it a keeper..........

[raptor347]

If it runs anything like the smaller motors, it will be a beast. I'll let you know when I get one in my hands (should be today or tomorrow).

[Punisher 67]

I might order one also just to get the mount made cause I know people are going to be asking for one

[m4a1usr]

I might order one also just to get the mount made cause I know people are going to be asking for one

I'd send you mine Peter but its not here yet. Monday I'm back off to DC for another month and chances are slim it will get in my hands by Friday. I'll keep my fingers crossed. I got one of your 5692 mounts coming and was toying with modding it for the 2028. Sound possible or am I ruining a work of art?

John

[Brushless55]

I might order one also just to get the mount made cause I know people are going to be asking for one

[Punisher 67]

I'd send you mine Peter but its not here yet. Monday I'm back off to DC for another month and chances are slim it will get in my hands by Friday. I'll keep my fingers crossed. I got one of your 5692 mounts coming and was toying with modding it for the 2028. Sound possible or am I ruining a work of art?

John

John did you want to trade in your 5692 mount for whatever new 2028 mount I come up with and yes it would be awesome if you did send the motor , If not I am sure I will get a hold of one without a problem

[m4a1usr]

John did you want to trade in your 5692 mount for whatever new 2028 mount I come up with and yes it would be awesome if you did send the motor , If not I am sure I will get a hold of one without a problem

Dont want a trade for a newer mount Peter. I have several 5692 motors and if I dont mod the one mount coming its a template if nothing else. You already did the hard part right? But the 2028 is going to be my 1/8th scale build for 2011 most likely. If you saw my work bench with the pile of CC motors you would think I'm nuts. Its all about choices right? Keep an eye out for a PM on Friday or Saturday asking for an address if UPS delivers something. Probably not my luck though!

John

[Brushless01]

Would this motor work well in a 51" mono ?

[Brushless55]

Would this motor work well in a 51" mono ?

YES!

[Brushless01]

Very cool might put one of these in my Rio instead of my 1717 motors. Would I be able to use the stock Rio prop ?

[video200]

any idea if this motor would push a shockwave 55 with a 70mm prop on 7 or 8S ?

[Brushless55]

any idea if this motor would push a shockwave 55 with a 70mm prop on 7 or 8S ?

on 8s with the right prop your SW55 would kick!

[video200]

i already have 5 X 70-72mm props and dont realy fancy the exspence of getting new big props.
would be fun to try for shure.

[Punisher 67]

A 70mm prop I would say would push that motor a little to hard for its liking , I would start with a 55 - 57mm then work my way up .

[Steven Vaccaro]

I have 4 left in stock.

[Steven Vaccaro]

I've delt with Dan a kd and he is kinda a joke
the reason they are so similar, is possibly they are built by the same company

Dans a good guy. He's been helping guys with low budget, high power setups for years. Far from a joke in my opinion.

[video200]

thats just it Punisher. i dont have anything inbetween 47 and 70mm. so i guess it wil have to stay a gasser for the time beeing sinse i cant se my self working up my prop collection 55-67mm at around $60 each s\b and shipped

[Make-a-Wake]

Dans a good guy. He's been helping guys with low budget, high power setups for years. Far from a joke in my opinion.

Dan's been very helpful and informative to me as well............................

[Brushless55]

Dans a good guy. He's been helping guys with low budget, high power setups for years. Far from a joke in my opinion.

I have some emails from this guy a while ago that says something totally different..
maybe in the past year he has changed?

[Punisher 67]

thats just it Punisher. i dont have anything inbetween 47 and 70mm. so i guess it wil have to stay a gasser for the time beeing sinse i cant se my self working up my prop collection 55-67mm at around $60 each s\b and shipped

Can I make a suggestion

I have a Neu 2230/1Y powered Sniper and use a Octuro X455/3 with awesome results . I would estimate the 2028 to be close in power

[Make-a-Wake]

Castle specs say 30k rpm's max for the 2028............10s = 32760 @ 4.2v per cell. I guess 10s with voltage dip and load would be high 20's.................

[Brushless55]

Guys...call me from now on. I've been out the past month for the birth of my son, but will be back in after the 1st of the year. I'm "the boat guy". I've known for MONTHS that these will be a GREAT motor for large FE boats, and have been discussing it with my sponsored drivers. The kv, size, and weight are perfect. I'll be trying one on 8s first, then 10s when it warms up a bit in a 43" mono, and a 40" hydro. I'll be running Hydra ICE 160's in both so I can datalog and check amps, volts, watts, etc. We'll DEFINITELY need a cooling jacket for this one!

From Castle
it should sing on 10s

[video200]

Can I make a suggestion

I have a Neu 2230/1Y powered Sniper and use a Octuro X455/3 with awesome results . I would estimate the 2028 to be close in power

of course you can punisher. i am sorry if i made it sound othervise mate that was not the intention.