medina619 brushless conversion

[medina619]

well i started my Brushless conversion and its in testing phase.lol I wanted to share my progress to help others by passing on some of my trial and errors. So far im very impressed with my progress but still have a lot of room for improvement. I did add some Great Planes segmented Lead Weights to balance out the Rio. Im going to list some of the parts I installed for other to use or not. any recommendations are very welcome and needed. thanks!!!

Im running a Turnigy B36-40-07 2900kv Inrunner BL motor,Force Control 60a water cooled ESC and linked together with a Octura Coupler Flex Hex 5mm to .130.



60A Watecooled Waterproof Brushless ESC
http://cgi.ebay.com/60A-Watecool-Wat...ht_3639wt_1139
im pleased with the ESC it has a BEC and lipo cut off as well as soft start and other programmable functions.


Turnigy 2900kv brushless motor
http://www.hobbyking.com/hobbyking/s...idProduct=6532
the Turnigy brushless motor is a little shorter that stock motor but fits well. note: motor sleeve from stock motor is needed to tighten down motor.

Octura Coupler Flex Hex 5mm to .130 Cable
http://www.offshoreelectrics.com/pro...oct-ocfhe5mm13