Leopard 5692 on 10S, how......

[Gerwin Brommer]

do they handle it ?

Anyone already tried this combo ??

thinking about a 730Kv 5692 on 10S in a 40"mono

[avery]

Sry haven't tried but was considering two for my cto4. Sport running ialso looked no info on voltage so I did math with 12s 32000 thereabouts . Will keep an eye on post as am interested

[Fluid]

All you have to do is look hard enough:

http://www.leopardhobby.com/product/...ionID=01020202

The LBP5692/3Y motor is good for 13S, 110 amps and 5500 watts, according to Leopard. Usable 10S rpm on the water is probably around 25,000 to 26,000.


.

[Gerwin Brommer]

Yep, I know.
But that is what the manufactorer says.
I'm curious about what the users say :-)

[mm123521]

Gerwin:
I am gonna try a 5692 in a 41 inch homebuilt cat.
The hull is 90 % complete, and may be in the water next weekend.

https://forums.offshoreelectrics.com/...highlight=5692

I bench tested the motor on 12S and the tachometer read 34000 rpm, no load.
The motor was pulling 2 or 3 amps, no load, full speed.

My first FE build.