Suppo 2-4s ESC's 200a, 125a, 70a, 50a

[FighterCat57]

Just so everyone keeps a good perspective on this; My per item price was the amount listed in the OP. Then $160 for freight and 4% PP fees... my cost was just under $850 for the parts listed above. Plus the 5 weeks of weekly BS it took to actually get it sent.. and the annoyance of getting *!***!***!***!**ed when they say they won't take them back. I'm basically taking an $8 hit per ESC.


So PLEASE, enjoy them.


They did send the right outrunner motors and they are the same ones that HK carries.

[Alexgar]

money sent thanks

[FighterCat57]

money sent thanks

Got it, thanks!



OK, 4 x 70a and 4 x 50a left!

I need to move these, start making me offers on them!

[FighterCat57]

money sent thanks

Please email your shipping address. I do not have it. Thanks!

[Karfrik]

Just got my 200a esc!!! wow thats what i call super fast shipping...thanks again Ben,.....Albert

[FighterCat57]

Just got my 200a esc!!! wow thats what i call super fast shipping...thanks again Ben,.....Albert

Yeah, I caught the deadline on some and shipped them on Saturday, so a few of them arrived today.

Enjoy!

[britscoot]

Thanks Ben

got my items today.
do i need to do anything with the 200 speedy?..ie corrosionx it.

Got them outies in yet?

cheers

[FighterCat57]

Thanks Ben

got my items today.
do i need to do anything with the 200 speedy?..ie corrosionx it.

Got them outies in yet?

cheers

Yellow 200a; Coated and Water Cooled, ready for use. Use caution as the middle layer FET board is inadequately cooled, stay conservative with amps. OK for 2-7s, no LVC for 5s-7s.

Add a 30-50v 4700uF capacitor and a 10 Ohm 2-5 watt no-spark resistor.

Use the Tx to program.
HIMODEL GX-45-70-125A.pdf

[Karfrik]

Ben so the 200a esc needs to be programmed?...or is it ready as it is?....Al

[FighterCat57]

Ben so the 200a esc needs to be programmed?...or is it ready as it is?....Al

It's setup for auto-calibrate, so you should be good as is.

[Karfrik]

excellent!!!...thanks,and thought you were sleeping already.....lol

[FighterCat57]

excellent!!!...thanks,and thought you were sleeping already.....lol

Yeah.... trying to!

[Alexgar]

recieved today thanks

[FighterCat57]

OK, from the MFR, this series and only this series has the following programming;

Again these were a limited run and not the same as the HiModel firmware.

[carlcisneros]

Ben;

I received teh 200A esc in the mail today.

will put ends on it and set it up this weekend. something to do due to the
long range weather forcast. (40's this weekend, BBBBRRRRRRRRRRRR)

Carl

[keithbradley]

I bought a batch of ESC's from Suppo factory direct. They completely messed up my order and sent everything EXCEPT what I ordered. These are listed at my cost before shipping and paypal fees. I have no use for them. They won't take them back, just discount my next order, so I just want them out of here.

Here's what I have:

2-4s w/LVC. 5s - 7s no LVC:
A. 10 pcs - 200a w/BEC & Water Cooling plate installed, water resistant conformal coating (SOLD OUT)
B. 4 pcs - 125a OPTO, no BEC - SOLD OUT

2-7s:
C. 4 pcs - 70a OPTO, no BEC 4 LEFT
D. 4 pcs - 50a OPTO, no BEC 4 LEFT

E. 16 pcs - Water Cooling plate 42mm Long x 32mm Wide x 7mm (4 LEFT)



A. $35
B. $25
C. $20
D. $15
E. $5

Shipping is Priority Mail $5 US, $15 International Paypal to fightercat57 gmail com
Make sure to include your address and phone for international.

You still have the 50A and 70A left Ben? Do you know if these have engine braking or reverse? I could use these for a cheap esc for my son's truck if so...

[Alexgar]

i noticed some blockage in one of the w/c tubes( possibly the epoxy used to set the tubes) so i took a 3/32 drill bit and cleared it fyi for all with the 200 amp model

[FighterCat57]

i noticed some blockage in one of the w/c tubes( possibly the epoxy used to set the tubes) so i took a 3/32 drill bit and cleared it fyi for all with the 200 amp model

Good catch, these are not the normal water tubes/blocks, so please review them carefully.

[mike robson]

do you have any 70a or 50a left?

[FighterCat57]

Everything's sold

[Alexgar]

good to hear

[FighterCat57]

OP updated... I found two in a box and one used in good shape.

[natenkw]

I'll Take the used one. Sending pay pal.
Thanks Nate.

[forescott]

So does the 200A w/bec and installed water cooling plate look like the last pic?

[FighterCat57]

So does the 200A w/bec and installed water cooling plate look like the last pic?

Yeah, the ones in blue. They have the nicer red striped water blocks.

[forescott]

I will take one. Got a T-600(1400kv) outrunner on the way I want to run in a 33-inch mono on 6s. And I'm on a tight budget!

[forescott]

Payment sent as a gift in 2-seperate transactions totaling $40-bucks. Sorry for any confusion. I had to get rid of a balance on a visa gift card! Thanks Ben!

[madgadget]

I'll take one of the remaining 200A. pp sent thanks

[FighterCat57]

Cool, sold! Thanks guys, will send em out tomorrow!

[natenkw]

Ok guy's. I decided to get a diferant esc from fighter cat, so the used one is still for sale.
Thanks Nate.