Yeah! Nice boat
I think I' ll use 2 rudders for my MHZ with a symmetrical assembly and water inlets
Last edited by Alfa Spirit; 10-02-2011 at 12:04 PM.
Nobody?
why not buying the twin rudders set?
to be honest I don't know if twin rudders will add stability.......?
Twin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
http://www.rcfastboats.com/
Twin rudder sets on Ebay don' t have water inlet.
The Speedmaster stinger is 115mm long with the DD and the propeller, this model should work
If the rudder is to long I can cut it, water inlet is high, but I want to know if a symmetrical mount is possible
I' ve got the answer
Last edited by Alfa Spirit; 10-02-2011 at 10:51 AM.
Speedmaster strut, flexshaft and coupler. Speedmaster is a nice part
Last edited by Alfa Spirit; 12-02-2010 at 02:04 PM.
Total lenght of the Speedmaster strut , drive dog and flexshaft is 120mm
Last edited by Alfa Spirit; 12-14-2010 at 03:28 PM.
I was looking around for twin rudders as well and now realized your point...........
You were referring to the brackets arrangement, so it is possible.........isn't it? Are you going to use two servos or one servo and interconnect the rudders? how?
Twin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
http://www.rcfastboats.com/
Exactly, it is possible with those rudders from Promise Hobby they are symetric, only one servo with good linkage
http://cgi.ebay.fr/160mm-rudder-for-...item20ab4f92ef
Last edited by Alfa Spirit; 12-02-2010 at 09:24 AM.
I will interconnect the rudders I' ll see how to when rudders will be at home. May be a U inverted part aluminium made fixed with up screws
Last edited by Alfa Spirit; 12-10-2010 at 07:57 PM.
MHZ Fountain Vs MHZ Racemaster, bottom of those hulls are very similar
I need advice please: trim tabs or not for this MHZ hull? Speedmaster 1 1/2" x 1 1/2" tabs, not a large model
Last edited by Alfa Spirit; 12-10-2010 at 07:58 PM.
The CC 1717 is a high torque motor. What' s best way to adjust the boat going straight?
I hope turn fins won' t be necessary, I really hate turn fins for semi scale offshore
Check this
MHZ FOUNTAIN.jpg
I am dying to this go.Was gonna jump on it in the sale thread but glad you decided to see it through.
Bookmarks