Results 1 to 9 of 9

Thread: Prop???

  1. #1
    Join Date
    Mar 2010
    Location
    on
    Posts
    245

    Default Prop???

    Hey guys,
    I have recently dropped a neu 1515 1y into my JAE 21.
    I'm running two 5000 2s 40c batteries in series threw a 120A ESC with cap board. (i know i need more ESC).
    Can anyone suggest a prop for this setup?
    I have been using a x445, x646 with no issues, would like some more speed.

    Steve.

  2. #2
    Join Date
    Apr 2007
    Location
    AZ
    Posts
    8,010

    Cool

    A 1747 or P747 will give more speed, although the 1747 has a lot of lift. Both will stress your ESC a lot.
    If it's just speed you want with cornering secondary, try a v942/3. As always, watch for heat issues.
    Another option is to add cup and pitch to your existing props.



    .
    ERROR 403 - This is not the page you are looking for


  3. #3
    Join Date
    Sep 2009
    Location
    HI
    Posts
    1,679

    Default

    I had a 1415 1y in a Jae 21 and I use the h7 that I was using with the spec setup. Be very carefull as you will stress those batteries in 1p. I have puffed a few 5000 40-50c pack in there with that setup. IME you will pull close to 120 continuous with the H7. Ultimatley I put the spec motor back in.
    If all of your wishes are granted, many of your dreams will be destroyed!

  4. #4
    Join Date
    Apr 2010
    Location
    FL
    Posts
    37

    Default

    Quote Originally Posted by BakedMopar View Post
    I had a 1415 1y in a Jae 21 and I use the h7 that I was using with the spec setup. Be very carefull as you will stress those batteries in 1p. I have puffed a few 5000 40-50c pack in there with that setup. IME you will pull close to 120 continuous with the H7. Ultimatley I put the spec motor back in.
    Mr. Mopar:
    Which company makes the "H7" prop?
    I plan to run the UL 1 motor with a 120amp swordfish esc, & I think a 4350mah hyperion. I saw a you tube vid & the jae had an H7 & was ripping a hole in the air!
    How are your temps with this prop?

    thanks,
    Glenn

  5. #5
    Join Date
    Sep 2009
    Location
    HI
    Posts
    1,679

    Default

    The H7 is made by ABC. You can get the raw props here at OSE. You can also experiment with the Octura 1450. At one point the 1450 was a bit faster but pulled a lot more amps from the batteries in my boat. I later modded the H7 a little more and got similar speeds with less amp draw. D.Smock can lead you in the correct direction. Mark Sholund could get one for you ready to go and hIs work is awesome.
    Last edited by BakedMopar; 01-10-2011 at 10:25 PM.
    If all of your wishes are granted, many of your dreams will be destroyed!

  6. #6
    Join Date
    Nov 2007
    Location
    FL
    Posts
    6,927

    Default

    Octura 447/3
    Mini Cat Racing USA
    www.minicatracingusa.com

  7. #7
    Join Date
    Apr 2010
    Location
    FL
    Posts
    37

    Default

    Thanks Baked.

    Glenn

  8. #8
    Join Date
    Nov 2008
    Location
    DE
    Posts
    2,322

    Default

    Yep! What BM said....H-7 Sholund prop.....
    "Will race for cookies!"
    IMPBA D12
    My Gallery: https://forums.offshoreelectrics.com/album.php?u=1738

  9. #9
    Join Date
    May 2008
    Location
    HI
    Posts
    1,684

    Default

    i use a 1415 1y with one of shoulnds 1450 jae props as well as the h-7. i prefer the 1450

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •